L298N Stepper Motor Driver (Green)

Model : ROB-00102

Supplier : Made in China

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT296.33Save BDT 4.39

100 +
BDT294.59Save BDT 6.13

Green 9 Available

You may also be interested in

L298N Stepper Motor Driver

This module is based on L298N,high voltage,high current dual full bridge driver which can be used to drive a DC motor and stepper motor, relay coil inductive load; using standard logic level signal control; having two enable control end allow or prohibit the work has a logic device power supply input terminal, in the case regardless of the input signal affect the internal logic circuit portion to operate at a low voltage; can be an external sense resistor, the amount of change in feedback to the control circuit. 

This module integrates a built-in 5V power supply. When you drive voltage of 7V-35V can onboard 5V logic supply, do not input voltage when using onboard 5V power supply, the +5 V power supply interface, but leads to 5V voltage for external use

When ENA is HIGH, IN1 IN2 control OUT1 OUT2
When ENB is HIGH, IN3 IN4 control OUT3 OUT4


1: driving  stepper motor

2: driving brushed DC motor 


Similar DC motor drivers made by techshopbd-

  • TB6612FNG Dual DC motor Controller (click here)
  • L293D Dual DC motor Controller (click here)
  • L298 Dual DC motor Controller (click here)
  • L298 Dual DC motor Shield (click here)

Login to post comments.
Shaurov | Sep 17,2014 at 08:30 AM
what is the difference...? quality...?
A.R | Nov 8,2014 at 10:16 AM
No. It has some extra features.
Shabab | Oct 26,2014 at 12:33 AM
why are u taking so long to import it ?
Ab.Alamin | Nov 6,2014 at 08:03 PM
Bahi jodi Red ta na thake tobe Green ta holeo cholbe ....Asle please call diben.....01911318807
A.R | Nov 8,2014 at 10:16 AM
Please click on 'Notify me W/A' you will receive an sms and e-mail when it is available.
Fizur2 | Jan 14,2015 at 01:52 PM
is it compitable with gear motor??
A.R | Jan 14,2015 at 04:10 PM
Shafayatjamil | Feb 24,2015 at 11:46 PM
s it compatible with Arduino Uno
A.R | Feb 25,2015 at 09:53 AM
It can be connected to arduino though it cannot sit on arduino like a motor shield.
Ishmam_ahmed | Jul 22,2015 at 07:33 PM
what are the extra features in the green vesion?
Kriton091 | Jun 13,2016 at 11:37 PM
What does it have extra in it which "L298N Stepper Motor Driver (Red)" one does not have?
FAHIM_REAZA | Jun 15,2016 at 11:00 AM
"L298N Stepper Motor Driver (Green)" has 4-SMD-LED for output indication and also 4-metal-hexa-spacer with quality-full PCB.
Abtahee166 | Nov 12,2016 at 07:37 PM
How to control the speed of motors
A.R | Nov 13,2016 at 09:37 AM
Faruk.fa | Jan 14,2018 at 05:06 PM
Do you have any user manual for this product? It has 2 jumper, what is the function of those. You said it has some extra features. But How do I know about those? So Please upload user manual.
A.R | Jan 15,2018 at 05:09 PM
Two jumpers shorts ENA and ENB with 5V. If you don't want the enable pins to be always HIGH, just remove the jumpers.It has a White connector for stepper motor unlike the red one.
Faruk.fa | Jan 18,2018 at 02:34 PM
thanks for the information.
Does it support GRBL?
I need GRBL supported controller.

A.R | Jan 18,2018 at 05:01 PM
No. This motor driver is not supposed to be used for CNC machine driving.
Tashfik | Feb 21,2019 at 12:02 PM
Can i get the switch of this motor driver separately?
A.R | Feb 23,2019 at 09:48 AM
Sorry. Not available here.

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.