Search

5mW Laser Module Emitter- Red cross

Model : PCM-00284

Supplier : Made in China

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT215.69

10 - 99
BDT211.31Save BDT 4.38

100 +
BDT209.56Save BDT 6.13

Green 46 Available

You may also be interested in

 
Summary:
Red Laser Emitter.

This Laser emitter, when powered, creates a Red beam.Its focusable acrylic lens lets you adjust it with hand without any tools.

Cautions: Avoid direct eye exposure to beams.

  • Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
  • Working current: Min 10mA, Typical 20mA, Max 25mA
  • Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC
  • Wavelength: 650nm
  • Working Temperature: Min -15°C, Typical 25°C, Max 35°C
  • Storage Temperature: Min -20°C, Max +25°C
  • Outline Dimension:  12mm(Diameter) x 35mm(Length)
  • Practical test for point head: reflection visible to random target >1000m
Login to post comments.
anon
Rahul.iub | Mar 16,2014 at 10:18 AM
Can i burn something with it....???
anon
Suntop | Aug 5,2014 at 02:25 AM
Hay Rahul.iub, if you need a burning laser ..... Buy a Samsung DVD writer and open it !

You will find a high power (Red & IR combined) Laser Diode

There would be 3 pins on it
(CD,DVD & Ground)

CD pin for IR (max 2.2 V)
DVD pin for RED (max 3.2 V)

You would need to gather Collimator & Optics (Lens) from other sources ( maybe form a cheap laser- that's what I did)

Also, make a current limiter circuit to drive or current will keep increasing when Laser Diode heats up and eventually avalanche breakdown will occur !

Good Luck !

P/S: I burnt a lot of matches in 3-4 seconds and was able to lit 2 cigarettes with lots of difficulties & my one died when I applied 4V to lit the 3 cigarette !
anon
Suntop | Aug 5,2014 at 02:31 AM
One more thing :

NEVER EVER LOOK INTO THE LASER DIODE, OR YOU WILL BE BLIND BEFORE YOU KNOW IT

to see IR use your cellphone camera at a hither angle or use this IR Receiver Diode

http://www.techshopbd.com/product-categories/light/289/ir-receiver-diode-techshop-bangladesh

it will give 0.7-0.8 volts when IR is shine upon it !

anon
Ibrahim32152 | Jul 23,2015 at 01:28 PM
where can I get collinlmator n optics lens
anon
Suntop | Jul 31,2014 at 12:48 PM
What's the lifetime of the laser diode ?

How many hours of continues runtime before it fails ?

Is it better than those 50 taka toy laser-key-chains ?
anon
Suntop | Aug 5,2014 at 02:32 AM
Vai answer dan na kano ?
anon
Suntop | Aug 5,2014 at 02:16 AM
Since techshopbd didn't respond to my query, so I just bought a Green laser form other source @1300 taka.

Don't konw what's wrong, why they are too moody to respond.
anon
A.R | Aug 5,2014 at 09:40 AM
I think you should understand that our office just opened 2 days back and we had other works on hand too. We give more priorities to the queries we receive through mail. And sorry, apart from the docs and product page links given here, we have no other info. If anything is not written in these docs, it means that we don't know the answer either unless anything is written on the product's body or packet.
anon
Suntop | Aug 5,2014 at 10:04 PM
I understand.... Thank You
anon
Suntop | Aug 10,2014 at 10:50 PM
Just bough one ! It's kind of like the laser beam you will see on price tag scanner/barcode scanner used in super shops.

Better than toy lasers available in local market.

Because this one actually has an automatic power controller and photodiode feedback which I can assure you because I disassembled it to check.

So brightness is almost constant within operating voltage range for any voltage .

Operating at low voltage such as 3 volt it draws current around 28.7 mA and at 4.5 volt it draws 18.9 mA due to APC which maintains the power level nearly the same .

You can't get a DOT from this laser only LINE and by focusing the width of the line can be varied, not lenght .

The projection angle of the line beam is 100 degrees. Tough metal body also keeps laser diode cool, I am expecting a longer life from this laser.

Typical application : leveling, measuring height, security or simply exlporing it.
anon
Suntop | Aug 13,2014 at 06:26 PM
Correction/Updates :

Do make DOT instead of line,

First unscrew the focusable lens. Now hold the metal front firmly & `twist the black plastic thread in counter clockwise to unscrew it. You you can remove the line lens . Put back the black plastic and screw to adjust focus to get DOT light .
anon
Sayeed921 | Aug 15,2015 at 07:55 PM
Can it burn anything?
anon
Kriton091 | Sep 19,2014 at 10:01 PM
Is there any other colored available?
anon
A.R | Sep 20,2014 at 04:29 PM
No.
anon
Niloy01 | Dec 24,2014 at 08:01 AM
Vaia ei LD die ki buening laser banano jabe
anon
HADIUL | Jan 4,2015 at 04:23 PM
Vaia laser die ki plastic cutter banano jabe ?
anon
Phsajal | Feb 4,2015 at 05:58 PM
Can i burn paper with this laser
anon
MUSA_reza | Jun 27,2015 at 12:10 PM
ei laser er focus r light er kono pic dile khub valo hoto
anon
Ibrahim32152 | Jul 27,2015 at 02:25 PM
atar body ki metal na plastic

anon
Sayeed921 | Aug 18,2015 at 09:34 PM
5mW diye ki burning laser hobe?
anon
A.R | Aug 23,2015 at 12:20 PM
No.
anon
Ibrahim32152 | Dec 13,2015 at 12:43 AM
10mW,15mW,20mW laser diode anenna keno amra tho buy korte chai apnara anle problem ki???
anon
Farhan_T | Apr 28,2016 at 04:14 PM
Please let me know does it points as a straight line? And what is the operating voltage of the laser?
anon
FAHIM_REAZA | May 2,2016 at 12:03 PM
>>Yes, its light emitted into a focal point.
>>Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC.
anon
Emon.dkbd | Dec 30,2016 at 02:40 AM
Hi, can you provide us 1W or 2W laser diode for making a wood engraver!!
anon
Sakkhor111 | Mar 30,2017 at 04:27 PM
I bought this but after receiving the delivery it was not as same as the picture. It was only a normal diode!
anon
Sakkhor111 | Mar 30,2017 at 04:27 PM
I bought this but after receiving the delivery it was not as same as the picture. It was only a normal diode!
anon
A.R | Apr 2,2017 at 04:03 PM
Really? Please mail to customerservice@techshopbd.com with your order id and a picture of the product which was sent to you.
anon
SM9604 | May 7,2017 at 12:09 PM
I need burning laser please store it
anon
Riaj_Uddin | Jul 12,2017 at 03:01 AM
এর রেড বিমটি কি ভিজিবল? অর্থাৎ, লেজারের মাথা থেকে বাধাপ্রাপ্ত জায়গা পর্যন্ত দূরত্বে লাল লাইনের মত তৈরী হবে?
anon
Riaj_Uddin | Jul 12,2017 at 03:03 AM
এর রেড বিমটি কি ভিজিবল? অর্থাৎ, লেজারের মাথা থেকে বাধাপ্রাপ্ত জায়গা পর্যন্ত দূরত্বে লাল লাইনের মত তৈরী হবে?

অগ্রিম ধন্যবাদ।


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.