Search

4 Channel 5V Relay Module

Model : MOD-00039

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT250.12

10 - 99
BDT244.97Save BDT 5.15

100 +
BDT242.92Save BDT 7.20

Red Out of Stock

You may also be interested in

 
Summary:
4 Channel 5V Relay Module

Four 5V relayes together in a single board to control 4 loads simultaneously. The relays Can be easily switched by microcontroller or arduino.


  • Rated coil Voltage:5V DC
  • Operating Frequency:50/60HZ
  • Nominal Current:10A AC, 10A at 28V DC 
  • Maximum Switching Voltage:250V AC, 28V DC.
  • Power Required by the board:Vcc=5V DC(For relay coils),5V DC(For energizing every relay individually)
Login to post comments.
anon
Anik.predator93 | Feb 12,2015 at 12:11 PM
Will I connect the In1,In2..In4 directly to Arduino pin?
anon
A.R | Feb 14,2015 at 10:31 AM
Yes.
anon
Shababhsiddique | May 28,2015 at 08:23 PM
what is the difference between this and the old device controller?
https://www.techshopbd.com/product-categories/modules-9698/1242/device-controller-5-switches-techshop-bangladesh
anon
A.R | May 30,2015 at 09:50 AM
This is already elaborately explained in 'compare products' section here. Please check.
anon
Moseurbsl | Mar 22,2017 at 11:18 AM
U have compare prducts section,
I didn't know. Where I can find it.
anon
Shawan | Jun 11,2015 at 10:33 AM
Do you have 8 channel 5 volt relay module? I need it urgently
anon
A.R | Jun 11,2015 at 05:52 PM
No. Sorry.
anon
Tarifbabu | Sep 29,2015 at 12:08 PM
is there available 24V relay module? In industry most of the devices,sensors,controller are operated 24Vdc. So, there should be 24VDC relay module.
anon
A.R | Sep 29,2015 at 12:50 PM
24V relay is available here: https://www.techshopbd.com/product-categories/relay/838/relay-24vdc-techshop-bangladesh but not in module.
anon
Techspree | Dec 4,2015 at 07:44 PM
Hi
Can I use it with raspberry pi? Are there any optocouplers with this board?
anon
A.R | Dec 7,2015 at 10:11 AM
Possible. No optocoupler included.
anon
Sadique14 | Jan 29,2016 at 10:27 PM
Can I use it with microcontroller to on-off fan, light(which we use in our home)?
anon
A.R | Jan 30,2016 at 02:05 PM
You can.
anon
Sadique14 | Feb 1,2016 at 06:52 PM
এটা কি directly microcontroller এর সাথে connect করতে পারব, নাকি ULN2003 এর মাদ্ধমে connect করতে হবে?
anon
A.R | Feb 2,2016 at 09:30 AM
ULN প্রয়োজন নাই।
anon
Nadimulhuq | May 3,2016 at 03:57 PM
Can i control water pump or same high load device using this relay module?
anon
Nadimulhuq | May 3,2016 at 03:58 PM
can i control water pump or same high load device using this relay module?
anon
FAHIM_REAZA | May 3,2016 at 05:46 PM
It does depend on the load. The "4 Channel 5V Relay Module" can perform with 10A 250V AC and 10A 30V DC.
anon
FAHIM_REAZA | May 3,2016 at 06:03 PM
If you want to perform with high voltage, then please use opto-isolated relay module. The maximum load of our “1 Channel 12v 30A Opto Isolated Relay Module” is: AC 0V to 250V/30A and DC 0V to 30V/30A and ½ HP 240V AC. If our module fulfilled your requirement, then we will suggest you to use it.
[Link: https://www.techshopbd.com/product-categories/modules-98775/1751/1-channel-12v-30a-opto-isolated-relay-module-techshop-bangladesh ]
anon
Simonn | Jun 11,2016 at 01:37 AM
can i use it with PIC microcontroller for On Off light fan in our home by android phone? (sorryim beginner)
anon
FAHIM_REAZA | Jun 11,2016 at 01:51 PM
Yes, you can use.
anon
Himu2511 | Jun 15,2016 at 08:06 PM
Which switch type is used in this 4 Channel 5V Relay Module?
Single Pole Single Throw/Single Pole Double Throw/Double Pole Single Throw/DoublePole Double Throw
anon
FAHIM_REAZA | Jun 19,2016 at 09:27 AM
Single Pole Double Through (SPDT)
anon
Himu2511 | Jun 19,2016 at 09:30 AM
Could you explain why ?
anon
Pashaa31 | Jul 20,2016 at 01:09 AM
eta ki milisecond er moddhe trip korte parbe
anon
FAHIM_REAZA | Jul 23,2016 at 11:16 AM
Dear customer, this is not suitable for so first switching. Please use "Solid state relay" for so first switching.
Link: https://www.techshopbd.com/product-categories/relay/2326/solid-state-relay-40a-3-32v-dc-input-techshop-bangladesh
anon
Sujjad | Aug 20,2016 at 03:18 PM
what is the minimum channel voltage to switching the relay? (if the channel voltage is 3.3v then relay will operate or not?)
anon
FAHIM_REAZA | Aug 21,2016 at 11:58 AM
The "4 Channel 5V Relay Module" will be operated with logical voltage +5V and 0V.
anon
Syket1212 | Nov 9,2016 at 06:27 PM
are you use bc547
anon
Syket1212 | Nov 9,2016 at 06:27 PM
are you use bc547
anon
SMARTKid | Jan 14,2017 at 01:43 PM
can this be used to control AC 250v appliances such as ceiling fans?
anon
Production | Mar 8,2017 at 12:24 PM
Just you can ON OFF .
anon
ShaanNabid | Aug 25,2017 at 12:22 AM
Can i use it with arduino and Bluetooth module to on off light using mobile.But there is no extra GND pin...
anon
A.R | Aug 26,2017 at 09:53 AM
You can.
anon
ShaanNabid | Aug 27,2017 at 07:30 AM
Can i get some tutorial or any diagram for this.
anon
A.R | Aug 27,2017 at 10:04 AM
Sorry we have not made any. We made one with 'device controller'. You can get some idea from here. https://www.techshopbd.com/tutorial-categories/arduino/72/chapter-14-interfacing-device-controller-with-arduino-techshop-bangladesh
anon
Khalid149 | Sep 18,2017 at 08:01 PM
Do we have 4 channel 12V relay module?
If we don't please tell me can use it in place of the 12V module.
anon
A.R | Sep 19,2017 at 09:56 AM
No. Sorry. We got 1 channel and 10 channel. Not 4.


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.