Search

PIR Motion Sensor (JST)

Model : SEN-00047

Brand : Sparkfun,USA

Supplier : SparkFun, USA

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT1095.56

10 - 99
BDT1072.77Save BDT 22.79

100 +
BDT1063.68Save BDT 31.88

Green 10 Available

You may also be interested in

 
Summary:
Motion detector

This is a 3-pin motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low.

This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses [email protected]

The alarm pin is an open collector meaning you will need a pull up resistor on the alarm pin. The open drain setup allows multiple motion sensors to be connected on a single input pin. If any of the motion sensors go off, the input pin will be pulled low.

The connector is slightly odd but has a 0.1" pitch female connector making it compatible with jumper wires and 0.1" male headers.

Note: The colors of the wires can vary greatly. Looking at the unit from the top, the middle wire is ground, the left-most wire is the alarm, and the right-most is the power.

For more details about this product,please click this link .

Login to post comments.
anon
Email2jahangir | Sep 15,2014 at 11:28 AM
WHAT'S THE DIFFERENT BETWEEN PIR Motion Sensor(SB00622A-2) AND PIR Motion Sensor
Model : SEN-00047
anon
A.R | Sep 16,2014 at 10:02 AM
Different suppliers, different internal structures and sensitivities.
anon
Email2jahangir | Sep 16,2014 at 11:58 AM
What's the advantages of Model: SEN-00047 than Model:SEN-00047
anon
Email2jahangir | Sep 16,2014 at 12:00 PM
sorry, I've write wrong model in the previous comment, What's the advantages of Model: SEN-00047 than Model:SEN-00007
anon
Mzajewel | Aug 25,2016 at 12:04 PM
I have a question about this model. Can it be used as presence detector or it is only usable for detecting motions. Actually I want to make a power saving lighting system for bed room. In a room there may be no motions every time while a person is present in that room. he can sleep or in sitting position but not moving.
anon
FAHIM_REAZA | Aug 28,2016 at 09:24 AM
Sorry! This is a motion detector. Output is activated only, when motion is available.
anon
Ratul_khan | Dec 3,2016 at 01:16 PM
Hlw,
I want to know the range of this sensor..
anon
Mujahid7eng | Dec 3,2017 at 04:32 PM
Prince taka 1055 for Complete circuit with motion Sensor or Only for motion sensor
anon
A.R | Dec 4,2017 at 09:16 AM
Only sensor. We have cheap one too Here: https://www.techshopbd.com/product-categories/motion/1336/hc-sr501-pir-sensor-module-techshop-bangladesh


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.