74253 Data Selectors/Mux

Model : DIC-00021

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT34.54Save BDT 0.46

100 +
BDT34.36Save BDT 0.64

Green 19 Available

You may also be interested in

It's a 3-STATE Data Selector/Multiplexer.

Each of these Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary,on-chip, binary decoding data selection to the AND-OR gates. Separate output control inputs are provided for each of the two four-line sections.The 3-STATE outputs can interface directly with data lines of bus-organized systems. With all but one of the common outputs disabled (at a high impedance state), the low impedance of the single enabled output will drive the bus line to a HIGH or LOW logic level.




  • 3-STATE version of DM74LS153 with same pinout
  • Schottky-diode-clamped transistors
  • Permit multiplexing from N-lines to one line
  • Performs parallel-to-serial conversion
  • Strobe/output control
  • High fanout totem-pole outputs
  • Typical propagation delay

Data to output 12 ns
Select to output 21 ns

  • Typical power dissipation 35 mW
  • Recommended Operating Voltage:4.75-5.25
  • Operating Free Air Temperature Range 0°C to +70°C
  • Storage Temperature Range -65°C to +150°C
Login to post comments.

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.