Search

PIC Programmer

Model : PRG-00002

Brand : Pi Labs,Bangladesh

Supplier : Pi Labs, Bangladesh

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT1310.47

10 - 99
BDT1234.20Save BDT 76.27

100 +
BDT1196.07Save BDT 114.40

Red Out of Stock

You may also be interested in

 
Summary:
PIC Microcontroller Burner.

PIC Microcontroller Burner

This is the clone of Pickit2. This programmer supports Pickit2 software. It  is a low-cost development tool with an easy to use interface for programming. It supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit microcontrollers, and many Microchip Serial EEPROM products.

 

Feature

  • You can program your mcu simply by placing on the ZIF socket.
  • 3 channel logic analyzer.
  • Built in USB to Serial Feature.
  • Support wide range of Microchip's MCU.
  • ICSP connector.

 

Kit Contains:

  • PIC Programmer.
  • DVD including User Guide,Loader Software, Simulation Software.
  • USB cable A to B.
Login to post comments.
anon
Fahadwajed | Jan 18,2013 at 11:05 PM
does this support "microC"?
anon
Fahad | Jan 21,2013 at 07:08 PM
This programmer has its own software to load hex file. So it can load any hex file to pic mcu regardless which compiler you use. Hope this helps! :)
anon
Asif2225 | Mar 9,2013 at 09:04 PM
does it supports both 3.3 and 5 volt ics?
anon
A.R | Mar 10,2013 at 11:43 AM
Normally 3.3V IC has 5V tolerance.If you wanna burn 3.3V IC with this programmer,supply 3.3V to your IC from an external power supply.
anon
Asif2225 | Mar 10,2013 at 09:38 PM
I bougt pic programmers of yours today..and it works great.....thanks.
anon
A.R | Mar 12,2013 at 10:07 AM
You're welcome.
anon
Monir0805 | Apr 27,2013 at 11:34 PM
can i get User Guide[pdf].
anon
A.R | Apr 28,2013 at 11:00 AM
If you already have bought this product,you'll find it in the CD.
anon
Imteaz Rumi | May 6,2013 at 02:35 AM
is it handy for pic15f877a ??
anon
Imteaz Rumi | May 6,2013 at 02:36 AM
is it handy for pic15f877a ??
anon
Imteaz Rumi | May 6,2013 at 02:37 AM
sry. is it handy for 16f877a?
anon
A.R | May 6,2013 at 10:29 AM
Yes it is.You can burn all the PIC microcontrollers with this burner.
anon
Neyamat | Jul 1,2013 at 09:42 PM
Does this need to calibrate? or I can use it instantly?
anon
A.R | Jul 2,2013 at 10:10 AM
You can use it directly after proper installation of PIcKit2 and the driver.
anon
Irfan00785 | Jul 4,2013 at 08:28 PM
I brought this programmer some days ago. There is no user manual in the given cd. Can u give me a user manual for this programmer.
anon
A.R | Jul 6,2013 at 01:57 PM
A mail has been sent to you.Please check that out.
anon
Shparvez001 | Jul 25,2013 at 05:56 PM
Bro , I didnot got the user manual.... Can anyone help me???
anon
A.R | Jul 28,2013 at 11:37 AM
Please send a mail to [email protected] mentioning your order number.We will check and then send you the manual.
anon
Shparvez001 | Jul 30,2013 at 12:15 AM
Actually a friend of mine bought it for me....
anon
A.R | Jul 30,2013 at 10:15 AM
Ask him/her the invoice number.If not totally possible to remember that,letting us know his/her user ID will work too.
anon
Ruhul08 | Oct 1,2013 at 11:32 PM
can you confirm me about the ICSP connectoror . does it work
anon
A.R | Oct 2,2013 at 10:23 AM
Of course it does.
anon
Hrmzulfikar | Dec 30,2013 at 05:53 PM
I have purchase the programmer but enclosed DVD does not work. Please send user manual through mail.
[email protected]
Order Information #1003950
anon
A.R | Dec 30,2013 at 06:04 PM
The DVD not only contains the manual only. But all the related softwares and compilers also. We sent you a mail 7 hours ago mentioning the details of returning the DVD. Please read that and follow the procedure. We are extremely sorry for this mishap.
anon
Noid.pavel | Feb 4,2014 at 06:00 AM
"pic10F200" burn korar jonno ki alada kono niyom achhe? ami otar data sheet dekhechhi. pin configuration alada. tai ami pin connection thik thak korechhi. tarporo pickit 2 "10F200" detect korchhe na! ami aro koyekta "10F200" burn korar cheshta korechhi kintu eaki rokom hoy. help korben please. thank you.
anon
Juwel997 | Mar 28,2014 at 06:08 PM
Can it program 93LC46A eeprom?
anon
A.R | Mar 29,2014 at 10:16 AM
It supports all the chips supported by Pickit2.
anon
Mostak.shahid | Apr 29,2014 at 12:48 AM
can i get the user manual through mail.my email is [email protected]
anon
A.R | Apr 30,2014 at 09:19 AM
Manual is given to the customer in a CD when he/she buys it. Haven't you got one?
anon
Rakib.Ctg | Jul 12,2014 at 04:35 PM
what's the function of of MCU selector switch? Do I need to press it after placing a MC in the zif socket? I couldn't find it in the manual. Please help me out.
I was trying to connect my 16F73 as my first trial.
anon
A.R | Jul 12,2014 at 05:09 PM
It's indicated in the diagrams of page 8 and 9. You have to turn on the Green or Yellow LED by pressing this switch according to the number of pins of your micrcontroller.
anon
Rakib.Ctg | Jul 12,2014 at 05:50 PM
thanks. Your comment helps. :-)
anon
Azim_rashed | Sep 17,2014 at 12:35 AM
Have any warranty or guaranty?
anon
A.R | Sep 22,2014 at 10:29 AM
Guaranty is applicable if there is any manufacturing error from our side.
anon
Xeroanonymous93 | Sep 22,2014 at 01:28 PM
I lost my software cd that came with it, and recently had my laptop setup. may I have the software name and version?
anon
A.R | Sep 23,2014 at 10:27 AM
We give the compiler Micro C Pro for PIC version 5.8.0. And simulation software proteus 7.
anon
Mamun01714 | Oct 2,2014 at 06:01 PM
I am facing a problem with this programmer now and that is "Programing failed at program memory adress 0x000000" with the PIC 18F2550, 16F887, 18F452 while I try to write a hex but sometimes read and erase possible. I don't know what is happening!! One by one I am loosing all of my PICs. Please help me about the problem.
anon
A.R | Oct 8,2014 at 12:26 AM
Make sure that you are exactly following the procedure mentioned in the manual. If no luck, please send the device back to us along with the invoice copy or order number.If you are living in Dhk, you can come to our office with the board.
anon
Sayom_Shakib | Oct 3,2014 at 12:07 PM
Um... Actually I am a starter in PIC... I know very little about this. Which burner will be better to me? PicKit2 or, this one?
anon
A.R | Oct 8,2014 at 12:06 AM
You can start with this one.
anon
Hossain.eee | Nov 10,2014 at 01:34 AM
can i use it to program PIC16F877A for my line following robot?And where do i get the codes?Can you please help on it?
anon
Xrenon | Feb 27,2015 at 08:19 AM
PIC16F628A (SMD) ki program kore ata burn kora kora jabe?? nd PIC16F628A (SMD) program kore burn jonne ki er burner lage??
anon
A.R | Mar 1,2015 at 10:53 AM
Yes.This one supports all PIC16F series.
anon
Farid_rokz | Mar 24,2015 at 10:35 PM
"pickit 2 vpp voltage level error check target and retry operation" I am facing this problem. Plz help.
anon
A.R | Mar 25,2015 at 12:08 PM
Please send us the product back along with a copy of your invoice. Sorry for this inconvenience.
anon
Farid_rokz | Mar 25,2015 at 05:52 PM
I've lost my invoice. Can I send you a printed copy of invoice which was sent to my Email?
How can I send back the product?
anon
A.R | Mar 28,2015 at 11:54 AM
By Courier or coming physically to our office.And yes, email copy is acceptable.
anon
Rashed4t4 | Jun 1,2015 at 02:20 AM
I bought this device few months ago. Everything was fine. Suddenly stopped working. My Computer says pickit 2 not found. Please help...
anon
A.R | Jun 2,2015 at 09:53 AM
Bring it to our Office. wee have to check it.
anon
Fahame | Jun 2,2015 at 08:46 PM
Can i program PIC10F222??
anon
A.R | Jun 4,2015 at 09:45 AM
List of supported series is given in the description. please see.
anon
Mahmud hassan | Aug 14,2015 at 08:31 PM
Good product.
anon
Tarifbabu | Aug 29,2015 at 08:54 PM
when plugging the USB cable it shows that "USB Device not recognized". in programmer Vdd LED is not glow. is there Vdd problem? plz help.
anon
A.R | Aug 30,2015 at 11:30 AM
Please send us the product back with a copy of invoice. We have to check that.
anon
Tarifbabu | Sep 1,2015 at 01:05 AM
I just lost the invoice. The device was bought 2 or 3 months ago. Can I send it by courier? Its from Habigonj.
anon
A.R | Sep 1,2015 at 11:32 AM
Try to know the order number if possible.You can send the product by courier.
anon
Tarifbabu | Sep 8,2015 at 03:30 PM
"pickit 2 vpp voltage level error check target and retry operation" facing this problem?
plz help.
anon
A.R | Sep 10,2015 at 11:33 AM
Follow the user manual A TO Z including the chapter 'Troubleshooting'and make sure that you are using it properly keeping all the switches in proper direction. If no luck, send it back to us with invoice. We will have to check it.
anon
Raselnh2 | Sep 29,2015 at 10:25 AM
what is the length and width of this Programmer
anon
Raselnh2 | Sep 29,2015 at 10:25 AM
what is the length and width of this Programmer
anon
A.R | Sep 29,2015 at 11:41 AM
3.2'x2.4' approximately.
anon
Arig12152002 | Dec 20,2015 at 10:27 PM
programmer আমরা যদি ভুল করে নস্ট MCU লাগাই তা হলে কি programmer নস্ট হবে?বা pic programmer AVR MCU লাগালে programmer নস্ট হবে?MCU নস্ট হবে এটা জানি!
anon
A.R | Dec 21,2015 at 09:18 AM
সম্ভাবনা নাই খুব একটা।
anon
Jahangir03eee | Jan 2,2016 at 12:27 AM
is this programmer support Pic16F628, Pic16F628A and Pic16F877A ic's....

please suggest asap
anon
A.R | Jan 3,2016 at 09:34 AM
Supported IC series are mentioned in the description. Please see carefully.
anon
Pollob | Jan 24,2016 at 09:49 PM
Can I program PIC SMD Chip with this?
anon
A.R | Jan 25,2016 at 09:56 AM
If you use breakout board, you can.
anon
Boatman | Mar 12,2016 at 12:18 PM
Do I need any other accessories to operate the kit ?
anon
A.R | Mar 12,2016 at 12:24 PM
No.
anon
A.R | Mar 12,2016 at 12:26 PM
If you use the icsp pins then yes. 6 jumpers will be needed. Otherwise, no.
anon
Rahat.ho | Mar 15,2016 at 08:01 PM
Please inform me, this PIC Programmer can burn PIC16F84A Microcontroller ?
anon
A.R | Mar 16,2016 at 09:58 AM
It can burn all PIC16F.
anon
Rahat.ho | Mar 15,2016 at 08:22 PM
I want to confirm. Because PIC16F which is supported & PIC16F84A same series.
anon
Baizedshuvo | Mar 19,2016 at 09:41 PM
Hello, The given CD with this is not working properly. Can you please send me the soft copy of this through email?
anon
Aminur99rahman | Oct 3,2016 at 12:25 PM
i have two programer brought from you. after few days its not working. what should i do purchase another one from you or send back my damage one to you. please reply early... i can pay more if quality product provided.
anon
A.R | Oct 3,2016 at 12:33 PM
Hello,
Please send us the product back with a copy of your invoice. We will check tat and take necessary steps to help you.
anon
Mdrazu | Nov 8,2016 at 07:24 PM
Where do i place PIC16F676 (14) pin microcontroller on this board for burning my program.......Does it place like PIC16F72 or not .
anon
A.R | Nov 9,2016 at 10:06 AM
It's given in the user manual.
anon
Mdrazu | Nov 12,2016 at 09:40 PM
I have no usuer manual.techshop did not send me the user manual thats why am i asking >>> Where do i place PIC16F676 (14) pin microcontroller on this board for burning my program.......Does it place like PIC16F72 or not .
anon
A.R | Nov 13,2016 at 09:35 AM
Manual is given with the kit in a DVD. Didn't you get that? What was your order id?
anon
Mdrazu | Nov 13,2016 at 09:12 PM
Order Information #110911
anon
Sumonahmed | Dec 24,2016 at 01:40 PM
Hi sir. can I load any hex file in the PIC MCU by ICSP pin.when PIC MCU contain in the device..
My device include PIC16f72 IC..and PGD, PGC pin used for transistor bios signal for drive a relay..also I used external Crystal with PIC16f72 in my device..now you inform me ..Can I load hex file in the PIC MCU without Remove PIC MUC from my device..
anon
A.R | Dec 24,2016 at 03:13 PM
YOu can use ICSP pins.
anon
Sumonahmed | Dec 25,2016 at 09:37 AM
Hi Sir.sorry for again distrab you..I need clearly know about your Programmer..beacouse I already bought a pickit2 programmer from chittagong..that's programmer contain zif socket & ICSP pin..when I keep the MCU on thr zif socket that time programmer working..& when I connent ICSP Pin with my device that time programmer not working..but when I connent ICSP pin with MCU on a bred board without Crystal & PGD PGC pin keep free from LED or any load ,,that time also working..But I need load any hex file in the MCU when MCU include my device..& I used in device external Crystal..PGD,PGC used for transistor bios signal Please advice me..
thanks for Read with patient
anon
Sumonahmed | Dec 25,2016 at 04:21 PM

Hi Sir.sorry for again distrab you..I need clearly know about your Programmer..beacouse I already bought a pickit2 programmer from chittagong..that's programmer contain zif socket & ICSP pin..when I keep the MCU on thr zif socket that time programmer working..& when I connect ICSP Pin with my device that time programmer not working..but when I connect ICSP pin with MCU on a bred board without Crystal & PGD PGC pin keep free from LED or any load ,,that time also working..But I need load any hex file in the MCU when MCU include my device..& I used in device external Crystal..PGD,PGC used for transistor bios signal Please advice me..
thanks for Read with patient
anon
Sumonahmed | Dec 26,2016 at 08:54 AM
Hi Sir.sorry for again distrab you..I need clearly know about your Programmer..beacouse I already bought a pickit2 programmer from chittagong..that's programmer contain zif socket & ICSP pin..when I keep the MCU on thr zif socket that time programmer working..& when I connect ICSP Pin with my device that time programmer not working..but when I connect ICSP pin with MCU on a bred board without Crystal & PGD PGC pin keep free from LED or any load ,,that time also working..But I need load any hex file in the MCU when MCU include my device..& I used in device external Crystal..PGD,PGC used for transistor bios signal Please advice me..
thanks for Read with patient
anon
Sumonahmed | Dec 26,2016 at 08:56 AM
Hi Sir.sorry for again distrab you..I need clearly know about your Programmer..beacouse I already bought a pickit2 programmer from chittagong..that's programmer contain zif socket & ICSP pin..when I keep the MCU on thr zif socket that time programmer working..& when I connect ICSP Pin with my device that time programmer not working..but when I connect ICSP pin with MCU on a bred board without Crystal & PGD PGC pin keep free from LED or any load ,,that time also working..But I need load any hex file in the MCU when MCU include my device..& I used in device external Crystal..PGD,PGC used for transistor bios signal Please advice me..
thanks for Read with patient
anon
Sumonahmed | Dec 26,2016 at 08:56 AM
Hi Sir.sorry for again distrab you..I need clearly know about your Programmer..beacouse I already bought a pickit2 programmer from chittagong..that's programmer contain zif socket & ICSP pin..when I keep the MCU on thr zif socket that time programmer working..& when I connect ICSP Pin with my device that time programmer not working..but when I connect ICSP pin with MCU on a bred board without Crystal & PGD PGC pin keep free from LED or any load ,,that time also working..But I need load any hex file in the MCU when MCU include my device..& I used in device external Crystal..PGD,PGC used for transistor bios signal Please advice me..
thanks for Read with patient
anon
A.R | Dec 26,2016 at 10:13 AM
As far as we have seen from our experience, PGD, PGC pins must be free at the time of programming. This is why we have not connected those pins to any load in our trainer board.
anon
Sumonahmed | Jan 4,2017 at 03:42 PM
okhey sir..but no problem when connected crystal..can I programming when connected crystal...
anon
Sumonahmed | Jan 4,2017 at 03:43 PM
with PIC16f72 no IC.....
anon
Sumonahmed | Jan 4,2017 at 03:51 PM
bcs my older programmer not working when connected crysal with the MCU
anon
Sumonahmed | Jan 21,2017 at 08:41 AM
okhey sir..but no problem when connected crystal..can I programming when connected crystal...with PIC16f72 IC.bcs my older programmer not working when connected crysal with the MCU

Pls inform me..I need a programmarer if working
anon
Production | Jan 22,2017 at 11:30 AM
আপনি যে প্রোডাক্ট এর কথা বলছেন তার ইনভয়েস নাম্বার ও সমস্যাসহ ইমেইল করেন। [email protected]
anon
Sumonahmed | Jan 25,2017 at 08:50 AM
আমি চট্টগ্রাম থেকে 1টি programmer কিনেছি, এটার ICSP pin দিয়ে programme করা যায় না,যখন MCU সাথে crystal লাগানো থাকেে. আপনাদের এটা দিয়ে যদি crystal লাগানো অবস্থায় Programme করা যায় তাহলে আমি 1টা কিনবো.প্লিস জানাবেন.ধন্যবাদ.
anon
Production | Jan 25,2017 at 10:05 AM
আমাদের Development Board গুলিতে crystal আছে। আমরা এগুলো আমাদের programmer দিয়েই Program করে থাকি। আমাদের Development: https://www.techshopbd.com/product-categories/pic-98777/219/pic-trainer-kit-techshop-bangladesh, https://www.techshopbd.com/product-categories/pic-98777/1784/pic-mini-development-board-techshop-bangladesh
anon
Sumonahmed | Jan 25,2017 at 10:42 AM
thanks ofr inform me
anon
Muradshakil | Mar 9,2017 at 06:07 AM
windows 10 a to support kortece na! what can i do?
anon
A.R | Mar 9,2017 at 10:02 AM
Please google 'pickit2 in windows 10'.
anon
Atiqul58 | Apr 6,2017 at 04:31 PM
Dose PIC Programmer
Model : PRG-00002
support on windows 10??
anon
Atiqul58 | Apr 6,2017 at 04:32 PM
Dose PIC Programmer
Model : PRG-00002
support on windows 10??
anon
A.R | Apr 8,2017 at 09:35 AM
Tested in windows 7 only.
anon
Mtrrobi | May 22,2017 at 10:24 AM
pic16f688 te program upload kora jabe?
anon
Mahir.kabir | Jun 14,2017 at 09:02 PM
Can you guys tells me the name/part-numbers of the transistors you used on the programmer.
anon
Kaiyumhasan | Jan 24,2018 at 04:48 PM
Eta dia Pic 16F84A controler load kora jabe?
anon
A.R | Jan 25,2018 at 09:33 AM
যাবে। PIC16 সিরিজের সব আইসিই এটা দিয়ে লোড করা যায়। অনুগ্রহ করে ডেসক্রিপশন দেখুন।
anon
Mehedisakhawatleon | Jan 27,2018 at 07:23 PM
can I program "PIC16F73-I/SP(14031FV)" with this PIC Programmer? kindly make me clear
anon
Mehedisakhawatleon | Jan 27,2018 at 07:24 PM
can I program "PIC16F73-I/SP(14031FV)" with this PIC Programmer? kindly make me clear
anon
MEHEDI999 | Oct 21,2018 at 10:26 PM
এই প্রোগ্রামার আমার একটা লাগবে।
আপনাদের স্টকে আসবে কবে??
anon
A.R | Oct 22,2018 at 10:27 AM
কমপক্ষে আরও ২-৩ দিন। অনুগ্রহ করে প্রডাক্টের ছবির পাশে Notify me w/a ক্লিক করুন।
anon
Nazmulis | Feb 21,2019 at 02:22 PM
Atir Loder & simulation Softer ki kono link ar maddome amake dite paren. help me proyejon cilo
anon
A.R | Feb 23,2019 at 09:44 AM
ওগুলো প্রডাক্টের সাথেই ডিভিডিতে দেওয়া হয়।
anon
YOUSUFMOLLA | May 10,2019 at 05:48 PM
Please inform me,why this PIC Programmer can't fine PIC16F84 Microcontroller ?
anon
A.R | May 11,2019 at 09:55 AM
There must be no reason if both the chip and programmer are good. It supports the mentioned MCU.
anon
Israq hassan123 | Sep 9,2019 at 09:31 PM
when this product will come again?If come,kindly inform me.
anon
A.R | Sep 12,2019 at 09:59 AM
Not sure yet. May be next week.


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.