Digital IR Sensor Array6A (TCRT5000)

Model : ROB-00261

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT290.79Save BDT 9.24

100 +
BDT287.10Save BDT 12.93

Yellow 8 Available Only

You may also be interested in

Digital IR Sensor Array6A (TCRT5000)

This sensor package is for line following Bot. Every now and then hobbyist who are willing to play with Line following Robot has tough time with the IR sensor arrangement. This is a neat solution for them.

Six TCRT5000 reflective optical sensors have been used here.The LM358 dual OPAMP works as a comparator with two reference voltages set by six POTs.The sensors have 0.6 inch spacing.

Calibration:To calibrate the sensors,you must tune the respective POTs.Connect VCC and GND pins with the power supply and connect SEN1 to SEN6 pins with six LEDs.Keep tuning the POTs until the LEDs glow.

Now,Draw a Black line on a white paper or vice versa.After the proper calibration is done,the LEDs will turn on when the sensors trace black and they will turn off when the Sensors trace white.That means,The output is always either 1(High) or 0(Low).


Click Here for High resolution images of this product.


Similar product: Digital IR Sensor Array6B(TCRT5000) (Click here)

Login to post comments.
Prithul | Apr 7,2016 at 11:28 AM
Does it come with connector cables?
Talhasordar | Nov 1,2018 at 09:31 PM
Shafeeadnan | Feb 9,2019 at 11:15 AM
এইটার সিরিয়াল মনিটর দেখার জন্য কি সেনসর পিন এর সাথে আরডিউনো তে কানেকশন দিলেই হবে??
A.R | Feb 10,2019 at 11:16 AM
মানে? আপনি সেন্সরের আউটপুট আরডুইনোর সিরিয়াল মনিটরে দেখতে চান?

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.