Search

Miniature Solar Cell - BPW34 (Sparkfun)

Model : SOL-00001

Brand : Sparkfun,USA

Supplier : SparkFun, USA

TechshopBD, Bangladesh

Pricing
Quantity
Price

1 - 9
BDT190.00

10 - 99
BDT183.92Save BDT 6.08

100 +
BDT181.49Save BDT 8.51

Green 36 Available

You may also be interested in

 
Summary:
Monolithic photovoltaic string of solar cells.

The BPW34 is a tiny, general purpose PiN photodiode. This photodiode has a ton of uses, one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm), so it should produce power in a number of different settings. The rated open circuit voltage is 350mV (900nm, 1mW/cm2 light source), and short circuit current is 47μA.

These are fun (of course)! We shined a 940nm infrared LED on one of them and it produced about 0.5VDC open circuit voltage. Stringing four together in series, we were able to turn an LED on with them. They’ll also produce a small voltage, ~250mV, in a brightly, fluorescent-lit room.

Click here to know more about this product.

  • 4V output
  • Works best with natural sunlight
  • Provides true wireless power
  • No EMI/RFI generation
  • Solid state reliability
  • Small 8-pin surface mount SOIC
Login to post comments.
anon
Irfan00785 | Dec 11,2013 at 01:30 AM
when will be available
anon
A.R | Dec 11,2013 at 10:27 AM
These are on process of coming. Please turn on the free auto notification service so that you are notified as soon as it reaches again.
anon
Mortal | May 10,2014 at 02:01 PM
bhaia aita te wires join korbo kibhabe? aktu joldi bolben plz?
anon
Mortal | May 10,2014 at 02:01 PM
bhaia aita te wires join korbo kibhabe? aktu joldi bolben plz?
anon
A.R | May 11,2014 at 09:22 AM
You have to solder this on PCB. If you need to join wires, you have to connect the wires to your PCB.
anon
Mortal | May 12,2014 at 01:06 AM
normally jodi pin gule te wire join kore den akshonge wire gule k join kore nile hobe na?
anon
Mortal | May 11,2014 at 03:15 PM
emne wire lagale hobe? plz reply
anon
Mdrazu | Aug 10,2014 at 07:39 PM
5 and 8 pin is output.But i don't know what the use of other pins.Please help me about these:)
anon
A.R | Aug 11,2014 at 10:30 AM
Other pins are of no use. Just for soldering the cell.
anon
Mdrazu | Aug 11,2014 at 08:11 PM
thanks
anon
Ajoymandal | Sep 2,2014 at 08:00 PM
Eta dia ki Tamiya 70097 Twin-Motor Gearbox chalano jabe?
anon
A.R | Sep 3,2014 at 10:52 AM
No. Its output current is much less than Tamiya motor's rated current.
anon
Farid_rokz | Sep 21,2014 at 09:45 PM
It's output voltage is 4v but how about output current??
anon
A.R | Sep 22,2014 at 09:48 AM
Short circuit current:50 uA
anon
Faisal84265 | Nov 2,2014 at 03:29 PM
Can I directly generate electricity by keeping it in Sun light?
anon
A.R | Nov 4,2015 at 09:51 AM
yes.
anon
Aazdhrubo | Nov 3,2015 at 08:49 PM
Ei product ta kobe available hobe.Amar december e eta lagbe. Plz plz plz reply den.
anon
A.R | Nov 4,2015 at 09:51 AM
Very soon insha Allah. Please click 'Notify me W/A'. You will get Sms as soon as it is uploaded.
anon
Kamrulhasanj | Dec 15,2015 at 09:34 AM
Ei product ta kobe available hobe?? Amar february te eta lagbe. Plz plz plz reply den.
anon
A.R | Dec 15,2015 at 05:56 PM
Soon.
anon
Mitul.xr | Dec 31,2015 at 03:35 PM
Vai ami aita ki vaba kinbo?
anon
A.R | Dec 31,2015 at 03:57 PM
এই বইতে লেখা নিয়ম অনুযায়ী অর্ডার করুন। https://www.techshopbd.com/uploads/product_document/How%20to%20shop%20from%20techshopbd.pdf
anon
SHABABANAM | Jun 20,2016 at 02:01 PM
How is its output mA?
anon
FAHIM_REAZA | Jun 21,2016 at 09:33 AM
Short Circuit Current = 50 Micro-Ampere.
anon
Rumon2071 | Aug 6,2016 at 12:32 AM
jodi 2 ta series e lagai then mobile e charge dewar jnno j power bank use kori oita charge dewa jabe? gele kivabe dibo, n na gele reasn ta ki?? janaben
anon
FAHIM_REAZA | Aug 9,2016 at 10:07 AM
No. You can't use it to make a charge for your power bank. Because power bank uses 5v to charge and if you make a series connection with two "Miniature Solar Cell - CPC1822", that make a 8V output voltage and may damage the power bank.
anon
FarhadSyed | Feb 11,2017 at 02:46 AM
Do you have any PCB to mount this "Miniature Solar Cell - CPC1822" ?
anon
A.R | Feb 11,2017 at 10:18 AM
PCB must be done by user.
anon
Azimuddin | Oct 18,2016 at 10:48 PM
When this product will be available?
anon
A.R | Oct 19,2016 at 04:21 PM
Within next week hopefully.
anon
Absur_siam | Apr 28,2018 at 07:55 AM
I want to create a short circuit across the solar cell by connecting an ammeter across it. How can I do it without using a PCB?
anon
A.R | Apr 28,2018 at 10:38 AM
This is smd package. So, PCB must be done.
anon
Absur_siam | Apr 28,2018 at 11:47 AM
Can't I touch the ammeter's cathode and anode with the pins of the cells and measure the current?
anon
A.R | Apr 30,2018 at 09:55 AM
This is breadboard friendly. You can place it on breadboard and connect one male to male jumper in parallel with each leg. Then you can touch the ammeter probes with the two ends of the jumpers.


Copyright © 2012-13 Techshop Bangladesh. All rights reserved.