ESP8266 mBoard

Model : WIR-00068

Supplier : Techshop Bangladesh

TechshopBD, Bangladesh


1 - 9

10 - 99
BDT409.55Save BDT 10.54

100 +
BDT405.34Save BDT 14.75

Red Out of Stock

You may also be interested in

ESP8266 ESP-01 Wifi Mini Development Board, esp8266 esp 01, ESP8266 mBoard, 8266 wifi, arduino wifi esp8266, esp8266 dev board, esp8266 development board, esp8266 wifi mini development board.

Summary ESP8266  based  mini Development Board

ESP8266 is an inexpensive serial-to-wifi transceiver chip that can be used to connect any microcontroller with a serial port to a WiFi network. Because of its simplicity and low cost, it is getting popular among hobbyists for implementing it in Internet of Things (IoT) applications. ESP-01 module provides access to the power supply and I/O pins of ESP8266 through a 2x4 male header. But the pin arrangements are not user friendly. This “ESP8266 ESP-01 Wifi Mini Development Board”  has a 6 Pins L-Shape Male header for Programming that directly connects to FTDI USB to Serial Converter 3V3. Other 4 Pins are Yellow Male header for 3.3V, GND, GPIO2 and GPIO0. There’s also Flash and Reset Switch.   

  • Chip: ESP8266 ESP-01
  • Memory: 1MB Flash Memory
  • Interface: Serial Communication (RX, TX)
  • Baud Rate: 115200 (Default)
  • Board dimension: 44mm x 26mm
  • Working Voltage: 3.3V (DC)
Login to post comments.
anon | Mar 12,2017 at 12:08 PM
When open arduino serial monito,then show connecting ....... Can't show IP address
Production | Mar 14,2017 at 12:24 PM
এটা 3.3V এ চলে। যদি আরডুইনোর সাথে ব্যাবহার করতে চান তাহলে আপনাকে আরডুইনোর Rx Pin কে 3.3 তে কনভার্ট করে নিতে হবে।
Esp8266 Tx -----Arduino Tx
Esp8266 Rx-----2.2K Reistor to GND
-----1K Reistor to Arduino Rx
Siddiquinoor | May 21,2017 at 11:59 PM
I have purchased this module few days ago and want to use with Arduino. Would you please help me providing the pin connection between this module and Anduino?
A.R | May 22,2017 at 09:48 AM
It's not needed. It has a stadalone microcontroller. However, please see in google. If you want to use arduino just as USB to TTL converter, please see the comment above.
Mfq_khan | Sep 20,2017 at 08:36 PM
Today bought this product with a 3v3-5v FTDI USB to Serial. But not being able to upload simple blink code on to it. I have selected 3v3 jumper on FTDI. When I press (and continue) the flash button, green LED is lit and then press the reset button and release it then release the flash button as well. When I upload the sketch code, IDE compiles it fine but at last shows the errors:
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
error: espcomm_upload_mem failed
What should I do now? Please advise...
Production | Sep 23,2017 at 10:03 AM
You have to select Board: Generic ESP8266 Module
Mfq_khan | Sep 25,2017 at 03:08 PM
Please have a look on my Environment and settings parameters:

Windows 7, Arduino IDE version 1.8.4

Board: Generic ESP8266 Module
Flash Mode: DIO
Flash Frequency: 40 MHz
CPU Frequency: 80 MHz
Flash Size: 512K (64K SPIFFS)
Debug: Disabled
Debug Level: None
Rest Method: ck
Upload Speed: 115200 (also tried at 9600)
Port: COM4 (in fact it is COM4)

And the upload is not working with the errors previsouly stated.

HasanHASAN | Nov 17,2018 at 08:49 PM
i bought ur all iot product among these ESP8266 mBoard and
FTDI USB to Serial Converter 3V3 combined product , i can not interfacing.I upload ur code but when i open serial monitor only show connecting to ur network id .......
Production | Nov 18,2018 at 11:21 AM
আপনি Router এর username & password দিয়েছেন। এটি দিতে হবে।

Copyright © 2012-13 Techshop Bangladesh. All rights reserved.