SHOPPING CART
The Creality K1 Max is a high-speed, fully enclosed FDM 3D printer designed for professionals, educators, engineers, and makers who require both speed and a large build volume. Featuring a 300 × 300 × 300 mm build area and a CoreXY motion system, the K1 Max is capable of print speeds up to 600 mm/s with acceleration up to 20,000 mm/s², significantly reducing production time while maintaining excellent print quality.
The printer incorporates an all-metal hotend with a ceramic heater, dual-gear direct drive extruder, and hardened steel nozzle capable of reaching 300°C, allowing compatibility with a wide range of engineering and standard filaments. Intelligent features such as AI LiDAR for first-layer inspection, an AI camera for print monitoring, hands-free auto leveling, filament runout detection, and power-loss recovery improve printing reliability. Built-in Wi-Fi and Ethernet connectivity enable remote monitoring and print management through Creality's ecosystem, making the K1 Max suitable for rapid prototyping, educational laboratories, product development, and small-scale production.
| Parameter | |
|---|---|
| Printing Technology | FDM (Fused Deposition Modeling) |
| Motion System | CoreXY |
| Build Volume | 300 × 300 × 300 mm |
| Maximum Print Speed | 600 mm/s |
| Typical Print Speed | 300 mm/s |
| Maximum Acceleration | 20,000 mm/s² |
| Layer Height | 0.10–0.35 mm |
| Nozzle Diameter | 0.4 mm (replaceable) |
| Extruder | Dual-Gear Direct Drive |
| Hotend | All-metal with Titanium Alloy Heat Break |
| Maximum Nozzle Temperature | 300°C |
| Maximum Heated Bed Temperature | 120°C |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, PETG, ABS, ASA, TPU, PET, PA (Nylon), PC, PLA-CF, PA-CF, PET-CF* |
| Bed Leveling | Dual Hands-Free Automatic Leveling |
| AI LiDAR | Yes |
| AI Camera | Yes |
| Display | 4.3-inch Color Touchscreen |
| Connectivity | Wi-Fi, RJ45 Ethernet, USB Drive |
| Operating System | Creality OS |
| File Format | G-code |
| Slicer Software | Creality Print, Cura, PrusaSlicer, Simplify3D (compatible) |
| Filament Detection | Yes |
| Power Loss Recovery | Yes |
| Air Purifier | Built-in |
| Rated Voltage | 100–240V AC, 50/60Hz |
| Rated Power | 1000W |
| Instrument Type | Handheld LCR Meter |
| Basic Accuracy | ±0.2% |
| Display | 2.8-inch TFT Color Touchscreen |
| Display Resolution | 50,000 counts (Primary & Secondary) |
| Test Frequencies | 50 Hz, 100 Hz, 120 Hz, 1 kHz, 2 kHz, 10 kHz, 50 kHz, 100 kHz |
| Test Signal Levels | 0.3 V / 0.7 V / 1.0 Vrms |
| Output Impedance | 100 Ω |
| Measurement Speed | Fast: 10 readings/s, Slow: 2.5 readings/s |
| Equivalent Circuit | Series / Parallel |
| Measurement Modes | 2-wire and 5-wire |
| Test Parameters | C, L, R, Z, ESR, D, Q, Phase Angle, Reactance, DC Resistance |
| Correction | Open / Short |
| Comparator | Pass / Fail with audible indication |
| Data Hold | Yes |
| Interface | USB Type-C (USB HID & Virtual COM) |
| Remote Control | SCPI Compatible |
| PC Software | Supported |
| Battery | Rechargeable |
| Battery Charging | 5 V DC, 2 A |
| Typical Battery Life | Up to approximately 9 hours (50% backlight) |
| Dimensions | 90 × 195 × 41 mm |
| Weight | Approx. 380 g (including battery) |
The standard package typically includes:
Package contents may vary slightly depending on the production batch or regional distribution.
