gw_instek_gds-1102b_1_.jpg

Gw Instek GDS-1102B with LAN Digital Storage Oscilloscope

Model No: MIS-00605

TK. 59979.04

Quantity:

Category: Measurement

Manufacturer Specification
             
Model
GDS-1054B GDS-1072B GDS-1074B GDS-1102B GDS-1104B
Channels 4 2 + Ext 4 2 + Ext 4
Bandwidth DC ~ 50MHz (–3dB) DC ~ 70MHz (–3dB) DC ~ 70MHz (–3dB) DC ~ 100MHz (–3dB) DC ~ 100MHz (–3dB)
Rise Time 5ns 5ns 5ns 3.5ns 3.5ns
Bandwidth Limit 20MHz 20MHz 20MHz 20MHz 20MHz
Vertical Vertical Sensitivity Resolution 8 bit :1mV*~10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy* ±3%
Polarity Normal & Invert
Maximum Input Voltage 300Vrms, CAT I
(300Vrms CAT II with GTP-070A- 4/100A-4 10:1 probe)
Offset Position Range 1mV/div : ±1.25V
2mV/div ~ 100mV/div : ±2.5V
200mV/div ~ 10V/div : ±125V
Waveform Signal Process Plus, -, ×, ÷, FFT, FFTrms, User Defined Expression
FFT: Spectral magnitude. Set FFT Vertical Scale to
Linear RMS or dBV RMS, and FFT Window to
Rectangular, Hamming, Hanning, or Blackman-
Harris
Trigger Source CH1, CH2, CH3*, CH4*, Line, EXT**
*four channel models only.
**two channel models only.
Trigger Mode Auto (supports Roll Mode for 100 ms/div and
slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width, Video, Pulse Runt, Rise & Fall,
Timeout, Alternate, Event-Delay(1~65535 events),
Time-Delay(Duration, 4nS~10S), Bus
Holdoff range 4ns to 10s
Coupling AC, DC, LF rej., Hf rej., Noise rej.
Sensitivity 1div
External Trigger Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%~16pF
Horizontal Time base Range 1ns/div ~ 100s/div (1-2-5 increments)
ROLL: 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Timebase Accuracy ±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate 1GSa/s max.
Record Length Max. 10Mpts
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2nS (typical)
Average selectable from 2 to 256
X-Y Mode X-Axis Input Channel 1; Channel 3*
*four channel models only
Y-Axis Input Channel 2; Channel 4*
*four channel models only
Phase Shift ±3° at 100kHz
Cursors and Measurement Cursors Amplitude, Time, Gating available; Unit:
Seconds(s), Hz(1/s), Phase(degree), Ration(%)
Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,
Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle
Area, ROVShoot, FOVShoot, RPREShoot,
FPREShoot, Frequency, Period, RiseTime, FallTime,
+Width, -Width, Duty Cycle, +Pulses, -Pulses,
+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,
LFR, LFF, Phase
Cursors measurement Voltage difference between cursors ( ΔV) Time
difference between cursors ( ΔT)
Auto counter 6 digits, range from 2Hz minimum to the rated
bandwidth
Control Panel Function Autoset Single-button, automatic setup of all channels for
vertical, horizontal and trigger systems, with undo
Autoset
Save Setup 20set
Save Waveform 24set
Display TFT LCD Type 7" TFT WVGA color display
Display Resolution 800 horizontal × 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, vectors, variable persistence (16ms~4s),
infinite persistence
Waveform Update Rate 50,000 waveforms per second, maximum
Display Graticule 8 x 10 divisions
Display Mode YT, XY
Interface USB Port USB 2.0 High-speed host port X1, USB High-speed
2.0 device port X1
Ethernet Port(LAN) RJ-45 connector, 10/100Mbps with HP
Auto-MDIX (Only for the GDS-1054B, GDS-1074B, GDS-1104B.)
Go-NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard
Kensington-style lock
Miscellaneous Multi-language menu Available
Operation Environment Temperature: 0°C to 50°C. Relative Humidity
≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C
On-line help Available
Dimensions 380mmX208mmX127.3mm
Weight 2.8kg

Question & Answer

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year