AVR microcontroller burner/loader

AVR programmer is a USB in-circuit programmer for Atmel AVR controllers. The programmer uses a firmware-only USB driver, no special USB controller is needed.

 

Now this programmer also supports 8051 (AT89S Series) microcontrollers. Thanks to "CEMSTech Inc." for the firmwire upgrade.


Kit includes

  • A Programmer
  • USB Cable
  • User Manual DVD (with necessary software)

Features

  • Works under multiple platforms. Linux, Mac OS X and Windows are tested.
  • Supports all the AVR microcontroller.
  • Programming speed is up to 5kBytes/sec.
  • SCK option to support targets with low clock speed (< 1,5MHz).

 

USBasp Driver Install on Windows 10


(You have to disable signature enforcement) 

Step-1: Start>Update & security>Recovery>Restart now

Step-2: Troubleshoot>Advanced options>Startup Settings>Restart

7) Disable driver signature enforcement

Step-3: Press F7 to disable driver Signature enforcement


 

Question & Answer

Total 73 questions

Q: can it program at89s52 Questioned by rayed, 21-Feb-2013

Yes It can. Actually it support all the AT89S series. Answered by Fahad, 19-Mar-2013 05:23 AM

Q: There is No Option to Burn Atmega328 in Extreme Burner 1.2. So plz suggest How can I burn Atmega328. Although using Arduino IDE it possible to Burn Atmega328. Thanks Questioned by OishiElectronics, 19-Mar-2013

There is a tutorial for adding new microcontrollers to extreme burner, available in extreme burner's website.Plz check that out. Hope this helps. Answered by Fahad, 19-Mar-2013 11:10 AM

Q: Does this programmer support 8051 microcontroller (AT89C51) ? Questioned by eeedinar, 22-Mar-2013

No it isn't. Only AT89S series. Answered by Fahad, 23-Mar-2013 05:26 AM

But in the product description, it is written that it supports 8051 also? Answered by amitapos, 28-Mar-2013 06:01 AM

In the product description it says, "8051 (AT89S Series)". That mean AT89S series 8051 mcu are supported. Also in the document section a pdf about the supported mcu is provided. Hope this helps :) Answered by Fahad, 28-Mar-2013 11:13 AM

Q: I am no be able to program 89s52 with it Questioned by irfan00785, 26-Apr-2013

The 8051 mcu can't be program by placing on the Zif socket. You have to use the ICSP connector. There's a user manual on the DVD. The connection diagram is provided there. Hope this helps :) Answered by Fahad, 27-Apr-2013 07:54 AM

Q: can i burn Atmega16A Questioned by anikpro, 09-May-2013

Yes you can. Answered by Fahad, 11-May-2013 17:41 PM

Q: Can I burn Arduino / OptiLoader bootloader using this? Questioned by maksumon, 18-Jun-2013

Yes you can.Please follow this procedure.https://www.sparkfun.com/tutorials/247 Answered by A.R, 19-Jun-2013 03:51 AM

Q: please provide a complete tutorial link of programming at89s52 . 1.how to place it? 2.what burner software should be used? etc. Questioned by atiq786, 25-Jun-2013

Details are given in the user manual. Answered by A.R, 03-Nov-2013 09:27 AM

Q: which one should i buy ? please suggest me. i am a beginner. AVR programmer / AVR programmer V 2.0 ?? which one should i buy ? Questioned by zahid1989, 03-Nov-2013

We don't sell this one anymore. Only version 2 is going on. Both have same features. Answered by A.R, 03-Nov-2013 09:27 AM

Q: Hello,One months ago I have ordered this programmer,my order number is 1004730 ,date-09/03/2014 ,the disc you provided with the avr programmer is totally blank,I have contacted with you over telephone,you asked me to check the disc into other computer,I have checked that one too,its blank.If possible please send a disc with software,its not possible for me to collect the software from your office,if you cant send the disc,then please give me the links of those tutorial and software so that I can download those Questioned by Hussain63, 16-Apr-2014

Is the problem solved now? Answered by A.R, 13-Jun-2014 19:47 PM

Q: can it program atmega series(32,48 and all)? Questioned by comarpan, 12-Jun-2014

Full list of supported MCUs is given in the documents section. Please check that out. Answered by A.R, 13-Jun-2014 19:48 PM

Q: how can i burn AT89S52???? I followed the manual but it's not very clear to me. I set up the burner circuit but sometimes it works and some time doesn't. please clarify the procedure of burning program with this burner Questioned by raihan_tara, 05-Aug-2014

The instruction is already clear enough at page#8 of the manual. Please recheck your circuit. If still no luck, please specifically write what problem you are facing and mail to [email protected] As you are saying that sometimes the circuit is working and sometimes not, it means that there is no problem in the circuit's arrangement. If there was any problem, the circuit would have never worked. Such sudden problem may occur from loose connection, power shortage, bad crystal,faulty capacitor etc. Answered by A.R, 06-Aug-2014 04:53 AM

Q: When I connect my programmer with the computer it does not sayUSBasp in the device manager pane...it says "Unknown device". when i update the driver as told in the manual it says the driver is up to date. Questioned by Tambahamba, 16-Aug-2014

May we know which operating system you are using? Sounds like either you have not properly installed the driver or the driver is not compatible with your OS. Answered by A.R, 16-Aug-2014 06:45 AM

i'm using windows 7 the manual says to update the driver to install it...i went as per the manual said i think something is wronf with the hardware Answered by Tambahamba, 16-Aug-2014 14:47 PM

If you are in Dhaka, and using a laptop, please come to our office along with the board and your laptop.Sorry for this inconvenience. Answered by A.R, 17-Aug-2014 06:10 AM

If any of your engineers live in Uttara..plz leave a contact no. If possible. Then it would be easy for me. Thank you. Answered by Tambahamba, 17-Aug-2014 12:01 PM

Driver Setup korte na parle Ei Bangla Tutorial ta dekhen. Clearly buje jaben: https://www.youtube.com/watch?v=LWjrGvZGUlY Answered by Nadimulhuq, 09-Jun-2015 06:29 AM

Driver setup korte na parle Ei bangla tutorial ta dekhen. Asa kori clearly buje jaben: https://www.youtube.com/watch?v=LWjrGvZGUlY Answered by Nadimulhuq, 09-Jun-2015 06:30 AM

Q: I bought the version 2.0 last year. Intitally it worked well but yesterday the microcontroller atmega328 was not detected and burned when connected with the zif but when I use the ICSP, everything works (same controller). Followed the pin patterned according to the manual when connected with the zif. Questioned by T-Ibrahim, 21-Aug-2014

Q: I bought the module last day. I have tried to load a program in ATMEGA 8A by using ISP Prog 1.72. But each time it shows "Can't enable chip error". How can it be solved. It is very urgent. Questioned by monir.yahoo, 17-Sep-2014

Please try with AVRpal and Extreme burner which we supplied with the CD. If still any problem, let us know. Answered by A.R, 18-Sep-2014 03:45 AM

Q: Mikro c compiler er jonno crack file proyojon. Help proyojon Questioned by Baharul, 20-Sep-2014

Q: প্রোগ্রামার এ কিভাবে হেক্স ফাইল লোড করতে হবে বিস্তারিত টিঊটোরিয়াল চাই। আমার পিসিতে ইউএসবি ড্রাইভার ইনসটল হয়েছে কিন্তু, 89s52 তে হেক্স ফাইল লোড, ইরেজ, রিড কিছুই হচ্ছে না। Extreme Burner এ ইরোর টা হচ্ছে "Can't enable chip error" Questioned by sumon.edu, 21-Sep-2014

Q: হেক্স ফাইল তো প্রোগ্রামারে লোড করতে হবেনা! যেই চিপটাকে প্রোগ্রাম করবেন সেটাতে লোড করতে হবে। এই বোর্ডের সাথে সরবরাহকৃ্ত সিডিতে বিস্তারিত এবং খুবই পরিস্কারভাবে হেক্স ফাইল লোডিং এর পদ্ধতি দেওয়া আছে। অন্যকোনো টিউটোরিয়ালের প্রয়োজন নাই। AT89S এর জন্য প্রয়োজনীয় সার্কিট ডায়াগ্রাম ও সফটওয়্যারের নামও দেওয়া আছে। Questioned by A.R, 22-Sep-2014

Q: can't install the driver in my laptop. i'm using windows 8. how can install that? please help Questioned by fatineee, 03-Oct-2014

Q: Is it possible to purchase this with out the USB cable for a price = current price - USB cable price . Many of us already have UBS cables (from Arduino, Printer etc) . Questioned by suntop, 16-Oct-2014

Sorry. This adjustment is not possible. Answered by A.R, 19-Oct-2014 04:36 AM

Q: Awesome video tutorials on AVR programming in Bangla by Jewel bro for beginners !!! Here is the youtube channel link: https://www.youtube.com/playlist?list=PLWTcH3F219sARQRkLEZUlFSAUM21wRVJT Questioned by suntop, 29-Nov-2014

Q: can it programme pic microcontroller? Questioned by greengold, 02-Dec-2014

NO! For PIC you need this.https://www.techshopbd.com/product-categories/pic-9676/212/pic-programmer-techshop-bangladesh Answered by A.R, 03-Dec-2014 05:01 AM

Q: Dear techshop,I want to buy this setup but i cant figure out which ic should i order first to program?could you help with the info? Questioned by zonaid, 13-Dec-2014

You can take ATmega16 or ATmega32. Answered by A.R, 14-Dec-2014 10:20 AM

Driver setup korte na parle Ei bangla tutorial ta dekhen. Asa kori clearly buje jaben: https://www.youtube.com/watch?v=LWjrGvZGUlY Answered by Nadimulhuq, 09-Jun-2015 06:32 AM

Q: Dear techshop,I want to buy this setup but i cant figure out which ic should i order first to program?could you help with the info? Questioned by zonaid, 13-Dec-2014

Q: can i program at89c series? please reply. Questioned by jahangir03eee, 27-Jan-2015

As already clearly written in the description- No. You can't. Answered by A.R, 28-Jan-2015 03:31 AM

Q: but how can i program at89c series, will you please suggest? are there any alternative programmer which support at89c? Questioned by jahangir03eee, 03-Feb-2015

Q: I have bought this Loader some days ago. But I can't load program. I found may be hex code is missing from ATMEGA 8 of loader. Questioned by monir.yahoo, 22-Feb-2015

Make sure that you are meticulously following the manual. If no luck, send us the board back with a copy of the invoice. Answered by A.R, 22-Feb-2015 11:59 AM

Q: sometimes my programmer can burn program; and sometimes not. In software it shows that can't find taget chip. But it can erase loaded program,and AVR pal can alaways show what chip is connected Questioned by sadatrafi, 23-Feb-2015

Q: Will Keil uVision IDE work with this programmer ? Questioned by suntop, 01-Mar-2015

May be not. This one supports all the softwares supported by USBASP.Nothing more. Answered by A.R, 02-Mar-2015 11:54 AM

Q: এক মাস হলো বার্ণারটা নিলাম,গতপরশু থেকে কাজ করছে না,আজকে কিছুক্ষন চললো তারপর আগের মত বার্ণারই পিসি খুজে পাচ্ছে না। কি সমস্যা হতে পারে বলতে পারেন ? Questioned by citianz2011, 25-Mar-2015

হঠাৎ এমন হবার কোনো কারন তো দেখছি না। কিভাবে হল? Answered by A.R, 28-Mar-2015 05:48 AM

Q: For more clear about how to load a hex file in microcontroller you can browse this video. https://www.youtube.com/watch?v=4rHWzO7tqQc Questioned by Nadimulhuq, 24-Apr-2015

Q: I have brought this burner some months ago. How can i able to 8051 (AT89S Series) microcontrollers burning. The service has added a few days ago. Does the old burner will support it? Questioned by Nadimulhuq, 24-Apr-2015

This is not a new feature. It supports AT89S from the beginning. Answered by A.R, 27-Apr-2015 03:57 AM

Q: Driver setup korte na parle Ei bangla tutorial ta dekhen. Asa kori clearly buje jaben: https://www.youtube.com/watch?v=LWjrGvZGUlY Questioned by Nadimulhuq, 09-Jun-2015

Q: do we have to make any adjustment for loading the program at first time??? Questioned by masud.an, 09-Jun-2015

No. Answered by A.R, 11-Jun-2015 11:57 AM

Q: Do i have to do anything else to program at89s51 like raising the Vpp to 12v? Or just icsp is enough? Questioned by shovon134, 10-Jun-2015

Use this. https://www.techshopbd.com/product-categories/8051-40507/1689/avr-at89s-plug-in-techshop-bangladesh Answered by A.R, 11-Jun-2015 11:57 AM

Q: i bought it on satday. I tried to program AT89s52 using ProgISP. everytime it says "chip enable program error". How can i get rid of it? Questioned by cse_hasan, 13-Sep-2015

Q: The driver is not working with windows 10 . is there any update version for windows 10 ? Questioned by nazibarafat, 12-Oct-2015

Please try these search results. https://www.google.com.bd/webhp?sourceid=chrome-instant&rlz=1C1GGGE___BD559BD580&ion=1&espv=2&ie=UTF-8#q=usbasp%20for%20windows%2010 Answered by A.R, 13-Oct-2015 03:25 AM

Q: is It supports Winbond-w25q32 SERIAL FLASH MEMORY.Read and write..pls tell me.. Questioned by masum30x, 29-Oct-2015

No. Answered by A.R, 02-Nov-2015 03:52 AM

Q: is it support Atmega 32A Questioned by shadhin135, 15-Nov-2015

yes! Full list of supported chip is given in the 'documents' section. Please see. Answered by A.R, 16-Nov-2015 03:42 AM

Q: ami akta nici but...akta bapar janina..ata diye ki avrstudio te kaj kora jay ? ami connect korci but kicue dekhay na Questioned by robinahmedotul, 16-Nov-2015

ভাই, জিনিসটার সাথে একটি ডিভিডি আছে। ডিভিডিতে ম্যানুয়াল আছে। অনুগ্রহ করে ঐ ম্যানুয়ালটি আগাগোড়া পড়ে সেই অনুযায়ী কাজ করুন। আর এভি আর স্টুডিও তো কম্পাইলার। সেখানে আপনি প্রোগ্রাম লিখবেন, হেক্স ফাইল জেনারেট করবেন। হেক্স ফাইল মাইক্রোকন্ট্রোলারের ভিতরে দেবার জন্য তো লোডার সফটওয়ার লাগবে। ্লোডার সফটওয়ারগুলো ডিভিডি এবং এখানকার ডকুমেন্টস সেকশন দুই জায়গাতেই দেওয়া আছে। দয়া করে আগে ম্যানুয়ালটি পড়ুন। নাহলে কাজ করতে পারবেন না। Answered by A.R, 16-Nov-2015 08:35 AM

tnxxxx bro... Answered by robinahmedotul, 16-Nov-2015 08:44 AM

arekta prosno..arduino ide er moto kono software ace ki ja diye compile ar load duttoi hobe...ae programer diyei.. Answered by robinahmedotul, 16-Nov-2015 08:47 AM

You can try Bascom AVR. Answered by A.R, 16-Nov-2015 09:59 AM

Q: Can I burn file in 89C2051 by this. Questioned by salimmiah, 23-Nov-2015

Never. Full list of supported chips is given in the documents section. Kindly see. Answered by A.R, 24-Nov-2015 03:20 AM

Q: Please can you help me , which programer need to programming AT89C2051 & available you. Questioned by salimmiah, 26-Nov-2015

1)https://www.techshopbd.com/product-categories/burners-programmers/2005/top2011-universal-programer-techshop-bangladesh 2)https://www.techshopbd.com/8051/1741/8051-programmer-techshop-bangladesh Answered by A.R, 28-Nov-2015 03:44 AM

Q: is there any connection needed in miso,vcc,sck,mosi,rst,gnd pin of rail?? is there any extra connection to write the programme???? Questioned by shahadathossain19, 28-Nov-2015

As we have replied to your mail, PLEASE read the supplied manual first. Every step is clearly described there. Answered by A.R, 29-Nov-2015 03:32 AM

Q: win 10 or win 8.1 a ki Avr programmer ar driver support kore????????? Questioned by shawon016, 28-Nov-2015

You must follow these links. 1)http://letsmakerobots.com/node/36841 2)https://www.google.com.bd/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwj11-DX2bTJAhXSc44KHeR6Am0QFggiMAE&url=http%3A%2F%2Fnetmaxtech.com%2Fhow-to-make%2Finstall-usbasp-driver-windows-8-and-windows&usg=AFQjCNEtxjMjn4MrYBXkqNRNatIurcUwHQ&sig2=GheSEWkAaYU54ek_YSimCQ&bvm=bv.108194040,d.c2E Answered by A.R, 29-Nov-2015 03:35 AM

Q: Ami ki at89c51 program korte parbo? Jodi aite na hoy ta hole ami konta diye korte parbo ??? Questioned by shehab, 18-Dec-2015

Check these.1)https://www.techshopbd.com/product-categories/burners-programmers/2005/top2011-universal-programer-techshop-bangladesh 2)https://www.techshopbd.com/product-categories/8051-98825/1741/8051-programmer-techshop-bangladesh Answered by A.R, 20-Dec-2015 04:13 AM

Q: arduino sketch ki upload korte parbo ? Questioned by shadhin135, 24-Dec-2015

No. Answered by A.R, 24-Dec-2015 11:11 AM

Q: Can I burn the hex file(from assembly code) to at89s52 microcontroller using avr programmer? Questioned by Sadique14, 30-Jan-2016

Yes. It supports AT89S series as written in the description. Answered by A.R, 31-Jan-2016 03:39 AM

Q: Vcc, GND etc pin গুলা breadboard এ লাগানর জন্য কোন wire টা লাগবে? Questioned by Sadique14, 10-Feb-2016

https://www.techshopbd.com/product-categories/connector/1135/male-to-female-jumper-wire-single-techshop-bangladesh Answered by A.R, 10-Feb-2016 14:54 PM

Q: i can't load the program. says like that: Found USBasp on USB port. cannot communicate with target chip! power on faild Questioned by shahadathossain19, 22-Feb-2016

Please make sure that you have installed the driver properly. Following the user manual without any mistake and your chip is not locked. Try with another chip if possible. If no luck, let us know. Answered by A.R, 23-Feb-2016 06:08 AM

Q: Can i get of this schematic view?? Questioned by Rakibul, 04-Jul-2016

Dear customer, our policy doesn't allow us to provide any schematic diagram of our products. If you have any problem to interface it or have you any query about this product, then your can contact with our "TechnicalTeam". They will help you. Answered by FAHIM_REAZA, 10-Jul-2016 06:46 AM

Q: I bought the programmer few days back. Also bought some Atmega8A chip. But I am unable to flash the chip using the programmer. It says "Chip enable program error". But Atmega32A is working fine. Please advise. Questioned by ashfaq.tuhin, 08-Aug-2016

Dear customer, it may due to the wrong chip placement. Please follow the user-manual. However if you have any problem to interface with it, then you can bring it to us, our "Technical Team" will provide you a proper instruction practically. Thanks for with us. Answered by FAHIM_REAZA, 09-Aug-2016 04:54 AM

Q: Can I change fuse bit of MCU by this programmar?? reply pls Questioned by Shohanur0, 07-Oct-2016

No. Answered by A.R, 08-Oct-2016 03:51 AM

Q: can i program "AT89c51" Questioned by Tanim_don, 08-Nov-2016

No. Please see the list of supported microcontrollers in the 'documents' section carefully. Answered by A.R, 08-Nov-2016 04:24 AM

Q: Bro i want to make RFID based attendace system project and where i need ATMEGA8 microcontroller with AVR Development board. Now my question is ,i found here two of your items one "AVR development Kit" and this one " avr Programmer" both supports atmega8. Now which one should i buy. please let me know early. i'm a beginner and your helpful answer will be too helpful and appreciable. thanks in advance. Questioned by Monir_diu, 01-Dec-2016

Please check your e-mail. We have already answered there. Answered by A.R, 02-Dec-2016 05:36 AM

Q: এটা দিয়ে কি 8951 এর প্রোগ্রাম লোড করা যাবে? আর সফটওয়্যারটা কি উইন্ডোজ 7 এ কাজ করবে? Questioned by boniamin, 18-Dec-2016

না। AT89 S series সাপোর্ট করে। সাপোর্টেড চিপের লিস্টটা দেখুন, প্লিজ। আর সফটওয়ার উইন্ডোজ সেভেনে চলে। Answered by A.R, 18-Dec-2016 11:13 AM

এটা আপনাদের কাছ থেকে কিনেছি আমি,সাথে মেগা32 ও কিনেছি।এখন কি আইসিটা জিফ স্লটে লাগালেই প্রোগ্রাম লোড করা যাবে?নাকি আলাদা আইএসপি কনট্রোলার লাগবে? Answered by boniamin, 21-Dec-2016 03:30 AM

আপনাকে অলরেডি মেইলে উত্তর দেয়া হয়েছে। আলাদা কিছুই লাগবে না। দয়া করে ম্যানুয়ালটি আগে পড়ুন। Answered by A.R, 21-Dec-2016 03:52 AM

Q: VCC,GND,MISO এগুলোর কাজ কি আসলে? Questioned by boniamin, 21-Dec-2016

VCC,GND,Sck,MISO,MOSI, RST এই ছয়টি আইএসপি পিন। জিফ সকেটে না বসিয়েও এই ছয়টি পিন দিয়ে আইসি লোড করা যাবে। Answered by A.R, 21-Dec-2016 03:53 AM

Q: Is it possible to programmed STC90C516RD+ chip by this kit?? [email protected] Questioned by smd.hannan, 07-Jan-2017

Never. Kindly find the list of supported chips in the documents section. Answered by A.R, 07-Jan-2017 14:12 PM

Q: attiny13/attiny85 a code upload kora jabe ei proggramer diye? Questioned by mtrrobi, 06-Mar-2017

Please see the supported chips list. https://www.techshopbd.com/uploads/product_document/AVR_Prog_Supported_MCU.pdf Answered by A.R, 07-Mar-2017 03:41 AM

Q: ei programmer ki ami direct arduino IDE er sathe use korte parbo as USBasp ???? Questioned by mushfiq.martinie.xen, 30-Mar-2017

পারবেন। Answered by A.R, 30-Mar-2017 09:25 AM

Q: i'm getting this error Arduino: 1.8.2 (Windows 10), Board: "ATtiny x5 series, CPU, ATtiny45, 8 MHz (internal), B.O.D. Disabled" C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\lenovo\AppData\Local\Arduino15\packages -hardware F:\My_arduino_works\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\lenovo\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries F:\My_arduino_works\libraries -fqbn=ATTinyCore:avr:attinyx5:TimerClockSource=default,chip=45,clock=8internal,bod=disable -ide-version=10802 -build-path C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283 -warnings=none -build-cache C:\Users\lenovo\AppData\Local\Temp\arduino_cache_133395 -prefs=build.warn_data_percentage=75 -verbose C:\Users\lenovo\AppData\Local\Temp\untitled1660020894.tmp\sketch_apr04a\sketch_apr04a.ino C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\lenovo\AppData\Local\Arduino15\packages -hardware F:\My_arduino_works\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\lenovo\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries F:\My_arduino_works\libraries -fqbn=ATTinyCore:avr:attinyx5:TimerClockSource=default,chip=45,clock=8internal,bod=disable -ide-version=10802 -build-path C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283 -warnings=none -build-cache C:\Users\lenovo\AppData\Local\Temp\arduino_cache_133395 -prefs=build.warn_data_percentage=75 -verbose C:\Users\lenovo\AppData\Local\Temp\untitled1660020894.tmp\sketch_apr04a\sketch_apr04a.ino Using board 'attinyx5' from platform in folder: C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1 Using core 'tiny' from platform in folder: C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1 Detecting libraries used... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\sketch\sketch_apr04a.ino.cpp" -o "nul" Generating function prototypes... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\sketch\sketch_apr04a.ino.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\preproc\ctags_target_for_gcc_minus_e.cpp" "C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\preproc\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\sketch\sketch_apr04a.ino.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\sketch\sketch_apr04a.ino.cpp.o" Compiling libraries... Compiling core... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\WInterrupts.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WInterrupts.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\wiring.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\wiring_analog.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_analog.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\wiring_digital.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_digital.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\wiring_pulse.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_pulse.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\wiring_shift.c" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_shift.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\HardwareSerial.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\HardwareSerial.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\Print.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\Print.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\TinySoftwareSPI.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\TinySoftwareSPI.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\TinySoftwareSerial.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\TinySoftwareSerial.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\Tone.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\Tone.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\WMath.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WMath.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\WString.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WString.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny45 -DF_CPU=8000000L -DARDUINO=10802 -DARDUINO_AVR_ATTINYX5 -DARDUINO_ARCH_AVR "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny" "-IC:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\variants\tinyX5" "C:\Users\lenovo\AppData\Local\Arduino15\packages\ATTinyCore\hardware\avr\1.1.1\cores\tiny\main.cpp" -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\main.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WInterrupts.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_analog.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_digital.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_pulse.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\wiring_shift.c.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\HardwareSerial.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\Print.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\TinySoftwareSPI.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\TinySoftwareSerial.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\Tone.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WMath.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\WString.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-ar" rcs "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\core.a" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\core\main.cpp.o" Archiving built core (caching) in: C:\Users\lenovo\AppData\Local\Temp\arduino_cache_133395\core\core_ATTinyCore_avr_attinyx5_TimerClockSource_default,chip_45,clock_8internal,bod_disable_862c6b341734c163adfc700890404261.a Linking everything together... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-gcc" -w -Os -Wl,--gc-sections -mmcu=attiny45 -o "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.elf" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283\sketch\sketch_apr04a.ino.cpp.o" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/core\core.a" "-LC:\Users\lenovo\AppData\Local\Temp\arduino_build_897283" -lm "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.elf" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.eep" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.elf" "C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.hex" Sketch uses 310 bytes (7%) of program storage space. Maximum is 4096 bytes. Global variables use 9 bytes (3%) of dynamic memory, leaving 247 bytes for local variables. Maximum is 256 bytes. C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -pattiny45 -cusbasp -Pusb -Uflash:w:C:\Users\lenovo\AppData\Local\Temp\arduino_build_897283/sketch_apr04a.ino.hex:i avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" Using Port : usb Using Programmer : usbasp avrdude: Warning: cannot query manufacturer for device: No such file or directory avrdude: Warning: cannot query product for device: No such file or directory avrdude: error: could not find USB device with vid=0x16c0 pid=0x5dc vendor='www.fischl.de' product='USBasp' avrdude done. Thank you. the selected serial port does not exist or your board is not connected Questioned by mushfiq.martinie.xen, 04-Apr-2017

Instead of using the Arduino IDE directly to program the chip, you should use another burning software. Follow these steps: 1. Download and install WinAvr(which automatically installs avrdude and specifies the PATH variable for direct use from command line) and Extreme Burner or AVRDUDESS if you don't have them installed. 2. Go to Sketch > Export compiled Binary in Arduino IDE to export a .hex file of the code. 3. If you haven't already done then set the fuses (follow a tutorial on the web if you need). You have to do this only the first time, although you can modify the fuses again, if required. 4. Locate the .hex file and burn it. Answered by kaziabraar, 14-May-2017 16:09 PM

Q: Can you please provide a schematic of the SPI connections to the ZIF socket? Questioned by kaziabraar, 15-May-2017

Q: Eta kobe stock e ashbe? I need it Asap. Questioned by tausif, 31-May-2017

Hopefully very soon. Answered by A.R, 01-Jun-2017 04:19 AM

Q: can i write atmega 8/16/32? Questioned by mdeabul, 16-Jun-2017

Please see here. https://www.techshopbd.com/uploads/product_document/AVR_Prog_Supported_MCU.pdf Answered by A.R, 19-Jun-2017 04:37 AM

Q: I bought it yesterday. The disk you guys provided me is not working. I can't get any files. I did download the driver and software from the document section but I can't write in AT89C2051... In the document section I see the supported devices... AT89C2051 is there but I can't find a single burner which supports that IC... Please help Questioned by fahomid, 15-Aug-2017

Hello, Please see here once again carefully. https://www.techshopbd.com/uploads/product_document/AVR_Prog_Supported_MCU.pdf We nowhere wrote that it supports AT89C. It works with AT89S. For AT89C, please use universal programmer. https://www.techshopbd.com/product-categories/burners-programmers/2005/top2013-universal-programmer-techshop-bangladesh Answered by A.R, 16-Aug-2017 04:45 AM

Q: Can you please tell me how to place chip in that socket.I am getting error while burning program.Errors are like-power on failed,cannot communicate with targeted chip Questioned by abrarakib, 26-Aug-2017

Chip placement has been clearly shown in the manual's page number 7 to 8. Please study that first meticulously. And what IC are you trying to burn? Which burner software are you using? Answered by A.R, 26-Aug-2017 10:59 AM

I am using extreme burner and burning https://www.techshopbd.com/product-categories/avr/637/atmega32a-techshop-bangladesh this IC Answered by abrarakib, 26-Aug-2017 13:19 PM

ATmega32A Answered by abrarakib, 26-Aug-2017 13:20 PM

As we said earlier, please study the manual first. Try with the software avrpal also. Make sure that you have not somehow locked the fuse bytes of the microcontroller. Take another microcontroller to test, If no luck in any of the above, please send the board to us with a copy of your invoice so that we can check. But please, before doing that check and double check by doing all the tasks mentioned above. We sell our boards tested so, usually they do not make problem. Answered by A.R, 27-Aug-2017 03:56 AM

Q: How can I install USBasp-windriver 2011-05-28 on windows 10 Questioned by HitenRoy, 13-Sep-2017

These links may help you. https://www.youtube.com/watch?v=P2_wG6BZncI https://netmaxtech.com/how-to-make/install-usbasp-driver-windows-8-and-windows Answered by A.R, 14-Sep-2017 04:29 AM

Q: 93C46wt read/write kora jabe?? 8pin eeprom Questioned by rony03118, 19-Jul-2018

No. This is for AVR microcontrollers. Please see the supported chip list in the documents section. Answered by A.R, 21-Jul-2018 10:02 AM

Q: এই বার্নারটা নিয়েছি, কিন্তু AT89s52 Support করাতে পারছি না, Error দেখায়। কেনো..? এবং কি করতে হবে..? খুব চেষ্টা করেও পারছি না৷ প্লিস একটু হেল্প করেন। AT89s52 কিভাবে সাপোর্ট করাবো তার একটা মিনুয়াল গাইড দিন, অনেক উপকৃত হবো। আমার G-mail : [email protected] Questioned by nazmulis, 18-Sep-2018

ম্যানুয়ালে তো লেখাই আছে। ম্যানুয়ালের ৮ নং পেইজে ডায়াগ্রামসহ দেওয়া আছে কিভাবে এটা দিয়ে AT89S সিরিজের মাইক্রোকন্ট্রোলার বার্ন করতে হয়। সেভাবে হয়নি? Answered by A.R, 19-Sep-2018 04:08 AM

Q: Hello bro. ই বার্নারর জন্য ড্রাইভার সফটওয়্যার win10 এ ইনস্টল করতে পারছি না। win10 এ এর ড্রাইভার সফটওয়্যার ইনস্টল করার একটা সিস্টেম বলে দিন। প্লিস খুব প্রয়োজন। Questioned by nazmulis, 10-Jan-2019

Please see here: https://netmaxtech.com/install-usbasp-driver-windows-8-and-windows/ Answered by A.R, 12-Jan-2019 05:25 AM

Q: আমি প্রোডাক্টডি নিতে আগ্রহী। কিন্তু স্টক এ না থাকায় নিতে পারছি না। কবে স্টকে পাবো জানাবেন প্লিজ? Questioned by abu_sufian, 08-Mar-2019

আরও তিন-চারদিন লাগবে। Answered by A.R, 09-Mar-2019 05:16 AM

Q: can I burn code to Atmega32A microcontroller by this programmer?? Questioned by alphazisan, 23-Mar-2019

Yes. Of course. Please find the supported MCU list in the 'documents' section. Answered by A.R, 24-Mar-2019 03:41 AM

Q: ভার্সন 1.4 দিয়ে কি AT89S সিরিজ প্রোগ্রাম করা যাবে? Questioned by skipper, 18-Apr-2019

যাবে। Answered by A.R, 21-Apr-2019 04:19 AM

Q: I have to need user manual pdf bcz attimeg 8 several time showing error i think i can't set the chip in the zip right position please sent to my mail [email protected] Questioned by shahin76, 22-Sep-2019

Manual is given along with the softwares in the supplied DVD. Please check that. Answered by A.R, 23-Sep-2019 03:23 AM

Q: Can i use it with atmel studio? Questioned by Mosharof_Hossain, 21-Jun-2020

Yes. Answered by A.R, 22-Jun-2020 04:28 AM

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year