LM2576(ADJ).PNG

LM2576 Adjustable Voltage Regulator

Model No: REG-00031

TK. 62.76

Availability: In stock

Quantity:

Category: Regulator

This is a 3A Step-Down Voltage Regulator

The LM2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step−down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation.These devices are available in fixed output voltages of 3.3 V, 5.0 V,12 V, 15 V, and an adjustable output version. 

These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the LM2576 are offered by several different inductor manufacturers.Since the LM2576 converter is a switch−mode power supply, its efficiency is significantly higher in comparison with popular three−terminal linear regulators, especially with higher input voltages.

In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically.A standard series of inductors optimized for use with the LM2576 are available from several different manufacturers. This feature greatly simplifies the design of switch−mode power supplies.

The LM2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and±10% on the oscillator frequency (±2% over 0°C to 125°C). External shutdown is included, featuring 80 A (typical) standby current. The output switch includes cycle−by−cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

 

 

Features

  • 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range, 1.23 to 37 V ±4% Maximum Over Line and Load Conditions
  • Guaranteed 3.0 A Output Current
  • Wide Input Voltage Range
  • Requires Only 4 External Components
  • 52 kHz Fixed Frequency Internal Oscillator
  • TTL Shutdown Capability, Low Power Standby Mode
  • High Efficiency
  • Uses Readily Available Standard Inductors
  • Thermal Shutdown and Current Limit Protection
  • Moisture Sensitivity Level (MSL) Equals 1
  • Pb−Free Packages are Available

 

Applications

  • Simple High−Efficiency Step−Down (Buck) Regulator
  • Efficient Pre−Regulator for Linear Regulators
  • On−Card Switching Regulators
  • Positive to Negative Converter (Buck−Boost)
  • Negative Step−Up Converters
  • Power Supply for Battery Chargers

 

 

Question & Answer

Total 2 questions

Q: Already blown 2 of these even before they could overheat, suppose to shutdown under fault condition ! A better alternate is MC34063 which I replaced in the circuit in stead of LM2576 (ADJ) keeping everything same as before (except adding an timing capacitor for the switching frequency), works like a charm ! If your current demand is below 500mA try MC34063, it's better, cheaper and can even withstand dead short . One is for BUCK/BOOST/INVERT with adjustable voltage from 1.23 to 40 Volts. Here is the link https://www.techshopbd.com/product-categories/converter-ic/696/mc34063-techshop-bangladesh Questioned by suntop, 02-Mar-2015

Q: Could you please give me the data sheet for this voltage regulator. I have purchased it from you just a few days back. My order number is 116870. I have seen its data sheet from Texas instruments. Then I have made the circuit by seeing it from there. But I am getting an output of 2-3volts. I also tried changing the value of the resistor for the feedback leg, but nothing works. Please reply soon. Questioned by BhuiyanImam, 04-Oct-2015

Please see the documents section for datasheet Answered by A.R, 05-Oct-2015 10:22 AM

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

Recently Viewed

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year