logo
Arduino-GSM-Shield-2-(Antenna-Connector).jpg
Arduino-GSM-Shield-2-(Antenna-Connector).jpg

Arduino GSM Shield 2 (Antenna Connector)

Model No: ARD-00074

TK. 11948.92

TK. 10340.42

Availability: In stock

Quantity:

0 Ratings / 0 Reviews

Save to Wishlist Notify When P/A Save to Wishlist Already in Wishlist Will be notify iconAdd to Cart Back Order Out of Stock iconGo to Cart

Category: Arduino & Accessories

Supplier: DFRobot

Enjoy 4% Discount on total bill on order worth BDT 10000 or more. Enjoy 2% Discount on total bill on order worth BDT 5000 or more.


The Arduino GSM Shield 2 allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel. It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

 

The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10’s TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or arduino Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

 

The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps.

 

To interface with the cellular network, the arduino board requires a SIM card provided by a network operator. The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board.

 

Click here to know more about this product.

  • make/receive voice calls and send/receive SMS messages easily for your robots or other device
  • AT commands allowed
  • software serial communication with Arduino
  • TCP/UDP and HTTP supported
  • 85.6 kbps GPRS data downlink and uplink maximum
  • Developed with Telefónica of Spain

Question & Answer

Total 2 questions

Q: I bought the Arduino GSM Shield (antenna connector). so which antenna i need or not.plz help as esrly as possible. Questioned by salekmondal, 02-Oct-2016

Please login to write answer

Q: I bought the Arduino GSM Shield (antenna connector). so which antenna i need or not.plz help as esrly as possible Questioned by salekmondal, 02-Oct-2016

Please login to write answer

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year