Motion Sensor Switch: MCU Based Motion and Light Detector 

Quick Installation: Not more than 10 Minutes 

The RZ022-5A has standard 86mm in size that fits in the standard pattress boxed i.e. typical switch box and the 5A current rating is competent for daily uses. Keep in mind this is a 3-wire switch and requires a neutral wire to work.

Exclusive ON/OFF Mode  

After upgrading to motion-activated switches, you may also able to control your light as like as a typical wall switch. At any time by pressing a button on the panel, you are able to take the manual control of your light bulbs without losing any settings. This feature allows users to have permanent manual control of the load and override the motion detecting mode when in need

Features    

• Modes: Occupancy, Vacancy and Manual modes.  
• Sensors: PIR motion sensor. Light sensor(photocell).  
• Time-Delay: 15 s, 1 min(default), 3 mins, 5 mins, 15 mins, 30 mins     
• Light Sensor: Off, 15 Lux, 25 Lux (default), 35 Lux   
• Sensor Sensitivity: Low Sensitivity, High Sensitivity    
• Wiring: Hot, Live and Neutral Wire  
•  Use: Living rooms, bathrooms, balcony, toilet, staircase,   offices     

Specifications     

• Power Source: 100 VAC ~ 265 VAC 
• Power Frequency: 50 / 60Hz 
• Installation Height: 1.2 m ~ 1.6 m 
• Detection Distance: 7 m ~ 10 m (<27℃) 
• Detection Range: < 150° 
• Detection Speed: 0.6 ~ 1.5m/s 
• Fluorescent / Ballast / LED: 500W 
• Incandescent / Halogen: 1100W 

Packaging Details

1 x Motion Sensor Switch: MCU Based Motion and Light Detector

Attention

Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please contact us to determine if further actions may be taken.

Need Help?

Our engineers are available to assist you. If you have any queries, please leave a comment below or call 09678110110 from 09:00 am to 08:00 pm (7 days a week). You can also reach us via Live Chat or Facebook Inbox.