PRODUCT CATEGORIES

SHOPPING CART

Subtotal (0 items) 0

No products in the cart

Return to home
Spectrum Analyzer TinySA Ultra+ ZS406 in Bangladesh
Spectrum Analyzer TinySA Ultra+ ZS406 in Bangladesh

Spectrum Analyzer TinySA Ultra+ ZS406

SKU: MIS-00887

Brand: Made in China

Warranty: 3 Days

Model: N/A

৳ 25300.04

Out Of Stock
Add to Wishlist

Category: Measurement

Share:

Description of Spectrum Analyzer TinySA Ultra+ ZS406

  • User interface:

  • Display resolution 480*320 pixels
  • Screen diagonal 4"
  • 16 bits per RGB pixels
  • Resistive touch control
  • Jog switch control
  • USB serial port control
  • Optional TTL USART port on the internal PCB
  • Linear power supply to avoid switching noise.
  • Spectrum Analyzer spec:

  • Input frequency range from 100kHz to 800MHz (900 MHz for Ultra+) in normal mode and up to 6GHz ( 7.3GHz for ZS407 ) with ULTRA mode enabled
  • Input impedance 50 ohm when input attenuation set to 10dB or more.
  • Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
  • Maximum +/-5V DC input
  • Absolute maximum input level of +6dBm with 0dB internal attenuation
  • Absolute maximum short term peak input power of +20dBm with 30dB internal attenuation
  • Suggested maximum input power of +0dBm with internal attenuation in automatic mode
  • For best measurements keep input power below -25dBm
  • Input Intercept Point of third order modulation products (IIP3) of +15dBm with 0dB internal attenuation
  • 1dB compression point at -1dBm with 0dB internal attenuation
  • Power detector resolution of 0.5dB and linearity versus frequency of +/-2dB below 5.3GHz, +/-5dB between 5.3GHz and 6GHz
  • Minimum burst length for correct level measurement at 850kHz RBW in zero span mode of 50 microseconds
  • Absolute power level accuracy after power level calibration of +/- 2dB
  • Built-in optional 20dB LNA with Noise Figure of 5dB up to 4GHz ( 6 GHz for ZS407)
  • Lowest discernible signal without LNA at 30MHz using a resolution bandwidth of 30kHz of -102dBm
  • Lowest discernible signal with LNA at 30MHz using a resolution bandwidth of 200Hz of -145dBm
  • Frequency accuracy equal to the selected resolution bandwidth
  • Phase noise at 30MHz of -108dB/Hz at 100kHz offset and -115dB/Hz at 1MHz offset
  • Spur free dynamic range when using a 30kHz resolution bandwidth of 70dB
  • Resolution filters with a width of 0.2, 1, 3, 10, 30, 100, 300, 600 and 850 kHz.
  • On screen resolution of 51, 101, 145, 290 or 450 measurement points.
  • Scanning speed of over 1000 points/second using largest resolution filters.
  • Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution bandwidth
  • Spur suppression option for assessing if certain signals are internally generated or actually present in the input signal
  • Headphone output for listening to the demodulated audio (AM only). Stereo connector with or without microphone, high impedance is louder, short protected
  • Signal Generator spec:

  • Sine wave output with harmonics below -40dB of fundamental from 100kHz to 800MHz ( 900MHz for Ultra+)
  • Output level selectable in 1dB steps between -115dBm and -19dBm
  • Above 800MHz choice of two output modes:
    • Cleanest signal mode: square wave, up to 4.4GHz ( 6 GHz for ZS407 ) with coarse frequency steps and less accurate output level
    • Highest accuracy mode: reduced harmonics with possibly strong spurs up to 5.4GHz ( 7.3 GHz for ZS407) with frequency resolution equal to below 800MHz and fine output level steps.
  • Level accuracy +/- 2dB up to 800Mhz between -72dBm and -19dBm, less accuracy below -72dBm, even less accuracy below -110dBm
  • Output frequency resolution 57.2Hz
  • Optional AM or FM modulation frequencies between 50Hz and 5kHz (AM) or 1kHz(FM) or sweep over selectable frequency span
  • AM modulation depth between 10% and 100%
  • FM deviation between 1kHz and 300kHz
  • Optional output level sweep over maximum the entire output level range
  • Reference generator spec:

  • Optional square wave output with fundamental at -35.6dBm connected to cal output
  • Frequency can be set to 1MHz, 2MHz, 4MHz, 10MHz, 15MHz or 30MHz.
  • Battery spec:

  • Charging time max 1 hour on 500mA minimum USB port or USB charger
  • Operation on fully charged battery for at least 2 hours (3 hours for Ultra+)
  • HW versions and differences:

  • V0.4.5.1 First HW version
  • V0.4.5.1.1 Updated LCD screen for availability reasons
  • V0.4.6 first Ultra+ ZS406
  • V0.5.3 first Ultra+ ZS407

Ratings & Reviews of Spectrum Analyzer TinySA Ultra+ ZS406

0.00
Out of 5

0 Ratings and 0 Reviews

5 star
0.00%
4 star
0.00%
3 star
0.00%
2 star
0.00%
1 star
0.00%
Your Rating:

Reviews (0)

No reviews yet. Be the first to review this product!

Questions & Answers about Spectrum Analyzer TinySA Ultra+ ZS406

Questions answered by Techshop (0)

No questions have been asked for this product yet.

Spectrum Analyzer TinySA Ultra+ ZS406

৳ 25300.04

Recently Viewed

What is the price of Spectrum Analyzer TinySA Ultra+ ZS406 in Bangladesh?

The latest and best price of Spectrum Analyzer TinySA Ultra+ ZS406 in Bangladesh is BDT 25300.04 Taka. You can purchase the Spectrum Analyzer TinySA Ultra+ ZS406 at the best price on TechShopBD.com or visit our office to pick yours up today.

Where to buy a Spectrum Analyzer TinySA Ultra+ ZS406 in Bangladesh?

You can easily buy the Spectrum Analyzer TinySA Ultra+ ZS406 at the best price in Bangladesh from TechShopBD.com (our online store) or visit our physical office.

Top Reasons to Choose TechShopBD for Purchasing Spectrum Analyzer TinySA Ultra+ ZS406

When you choose TechShopBD for purchasing Spectrum Analyzer TinySA Ultra+ ZS406, you’re not just buying a product — you're investing in quality, support, and convenience. Here’s why thousands of customers trust us:

  • Competitive Prices: We offer Spectrum Analyzer TinySA Ultra+ ZS406 at highly competitive rates, ensuring great value for your money.
  • High-Quality Products: All our products are high-quality and sourced directly from trusted manufacturers and suppliers.
  • Quality Passed: Every product undergoes strict quality checks to ensure it meets high performance and durability standards.
  • Expert Technical Support: Our experienced technical team is always ready to assist you with any queries or technical issues.
  • Warranty & Replacement Facility: Enjoy peace of mind with our warranty coverage and an easy replacement process for eligible products.
  • After-Sales Support: Get reliable assistance even after your purchase to ensure a smooth and hassle-free experience.
  • Fast Delivery: We ensure quick and safe delivery across Bangladesh.
  • Product Documentation: Access detailed manuals and datasheets to help you understand and use your Spectrum Analyzer TinySA Ultra+ ZS406 effectively.
  • Blogs and Videos: Explore step-by-step tutorials, detailed blog posts, and helpful video guides to easily set up and get the best performance from your Spectrum Analyzer TinySA Ultra+ ZS406.