2 Channel 5V Relay Module

Model No: MOD-00053

TK. 267.42

Availability: In stock


Category: Relay

Supplier: Techshop Bangladesh

Our 2 Channel 5V relay module comes with two on board 5V relays with all necessary pinouts. You can control two AC loads simultaneously using this module. Can be interfaced with Microcontroller and Arduino.

Note: Product color may vary as our stock rotates.

Question & Answer

Total 9 questions

Q: Can I use it with Arduino Questioned by Akhter, 02-Nov-2014

Yes. Answered by A.R, 02-Nov-2014 10:02 AM

Q: Can I use it with Arduino Ethernet Shield W5100. Questioned by Akhter, 02-Nov-2014

Yes. Answered by A.R, 02-Nov-2014 10:30 AM

Q: Help ! I am having Relay Chattering Problem with Arduino while trying to control pump motor ! Everything works fine until EMI generated from Fluorescent Tube Light (During On/Off of light) makes the Arduino go crazy ! You should have used Opto-coupler and Metal Oxide Varistor on board ! Anyway, do you happen to have Shielded Ethernet Cable? If anyone of you are having this kind of problems you may check the following sites, man ! http://arduino-info.wikispaces.com/RelayIsolation http://arduino-info.wikispaces.com/ArduinoPower Questioned by suntop, 11-Nov-2014

Q: cani use it with arduino uno(china). Questioned by mithukhan, 19-Oct-2015

Yes. Answered by A.R, 19-Oct-2015 09:50 AM

Q: Can i use it with Bluetooth Module Breakout (HC-05) ? Questioned by belalju, 14-Jul-2016

Yes. You can use. But none of the relay module can be driven directly from any "Bluetooth Module Breakout (HC-05)". You have to use a control unit between the "Bluetooth Module Breakout (HC-05)" and the "2 Channel 5V Relay Module". Hence, you can use any arduino or any single micro-controller or other signal control circuit as a control unit. However, if you have any problem with it, please contact with our "Technical Team". Thanks for with us. Answered by FAHIM_REAZA, 23-Jul-2016 10:32 AM

Q: can I get any sample code for using it with arduino UNO china please! Questioned by ahsanhabibanik1998, 27-Dec-2016

Code for single channel is available. You will get idea from here. https://www.techshopbd.com/tutorial-categories/arduino/79/controlling-ac-bulb-by-arduino-techshop-bangladesh Answered by A.R, 28-Dec-2016 15:33 PM

Q: Can it survive with 30 AMP 12 Volt.. wanna use it to switch BLDC so its important to know ampere limit .. inform me please .. Questioned by tamzid73, 04-May-2017

No. Answered by A.R, 05-May-2017 01:33 AM

Q: এখানে COM,NC এর মানে কি? Questioned by prosenjit.pollob, 07-Feb-2018

একটি বিষয় ক্লিয়ার করতে চাই। এইখানে কম্পোনেন্ট সম্পর্কে কাস্টমারকে বেসিক জ্ঞান দেওয়া কিন্তু আমাদের ডিউটির মধ্যে পড়ে না। অনুগ্রহ করে আপনি প্রথমে জেনে নিন রিলে কী, রিলের কয়টি ও কী কী টার্মিনাল থাকে। তাহলেই বুঝতে পারবেন COM , NO এসব কী। যদি মনে করেন এত পড়াশোনা করার সময় নেই তাহলে আপাতত এটা নিয়ে কাজ করার চিন্তাও স্থগিত রাখুন। কারন, এগুলো বোঝার বিষয়। ভিডিও টিউটোরিয়াল থাক আর লাইভ চ্যাট থাক, কিছুই বুঝি না, অন্ধের মতো কানেকশন দিচ্ছি এরকম হলে প্রজেক্ট তো মিলবেই না, জীবন যাওয়ারও রিস্ক আছে। Answered by A.R, 08-Feb-2018 09:21 AM

Q: Can I use MF jump wires in this?? Questioned by hasibulrahat999@gmail.com, 29-Jul-2021

Yes. You can use. Answered by Production, 29-Jul-2021 17:41 PM

Reviews & Ratings


1 Ratings / 1 Reviews







shourabjkkniu@gmail.com, 26-Aug-2022

mice products.


Help: 09678110110

09.00am - 08.00pm (7 days a week)


Pay cash on delivery

Pay cash at your doorstep



All over Bangladesh


Warranty and Replacement

Up to 1 Year