The sensor module has a pair of infrared transmitting and receiving tube, when detecting direction meets with obstacles (reflecting surface), reflected infrared receiving by the tube.

After the comparator circuit processing, green indicator will light up, at the same time the signal output interface  output a digital signal (a low level signal), can be adjust the detection distance through the potentiometer knob, effective distance range 2 ~ 60 cm, easy to assemble and use. So it can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and so on many occasions.

  • If there is an obstacle, the green indicator light on the circuit board.
  • Detection distance: 2 ~ 60cm
  • Detection angle: 35 °
  • Comparator chip: LM393
  • 3mm screw holes for easy mounting
  • Dimensions: 3.1 x 1.5cm
  • Working Voltage:3.3 V to 5 V.

Question & Answer

Total 17 questions

Q: Is it use only obstacle detector? It can't detect color? Questioned by Devasishpaul, 27-May-2015

Can differentiate between black and white. Answered by A.R, 28-May-2015 10:12 AM

Q: when will it available? plz its urgent Questioned by Raktim , 15-Sep-2015

Q: can i get it within 10 days Questioned by Raktim , 15-Sep-2015

Please call 01841300401 and ask. Answered by A.R, 17-Sep-2015 11:53 AM

Q: I need it within few's urgent can u provide it as soon as possible?????? Questioned by saqib11, 15-Oct-2015

It will take at least 1 week to come. Answered by A.R, 15-Oct-2015 10:47 AM

Q: okay...... that will do the work....... :) Questioned by saqib11, 16-Oct-2015

Q: Were's the sensor??? Questioned by saqib11, 24-Oct-2015

We said 'at least' one week. And we are back from 3 days holiday. Answered by A.R, 25-Oct-2015 10:25 AM

Q: Is the maker of the device is "Flying Fish"? I have bought one and its gnd and out pin is short. How can it be resolved? Questioned by Farhan_T, 23-Dec-2015

This is from China. When did you buy this and what was your order number? Answered by A.R, 24-Dec-2015 09:33 AM

Q: I bought it from outside, but it looks exactly same to this one. So I am curious about this before giving order. Questioned by Farhan_T, 26-Dec-2015

I have just checked the body. Yes,it's from flying fish. Answered by A.R, 26-Dec-2015 14:54 PM

Q: Do I need a 10k resistor as pulldown resistor in order to interface this with Arduino? Questioned by Shayon02, 02-Feb-2016

Please see these videos. Answered by A.R, 03-Feb-2016 09:34 AM

Q: Can you tell me how can I get analog output from the sensor instead of out pin? I need to know how the obstacle is? Questioned by btalha2, 16-Feb-2016

I need to know how far the obstacle is? Answered by btalha2, 16-Feb-2016 14:17 PM

I need to know how far the obstacle is? Answered by btalha2, 16-Feb-2016 14:17 PM

From this module, output must be taken from out pin only. Answered by A.R, 16-Feb-2016 14:29 PM

Q: can i use it in a line following robot? Questioned by dradman, 09-May-2016

Dear Customer, when you will work with “Line Following Robot”, you have to at least “IR Sensor Array_2”. Thus we will suggest you to use the following sensors. Thanks for with us. >> >> >> >> >> Answered by FAHIM_REAZA, 11-May-2016 11:27 AM

Q: I need this one urgently as soon as possible. Questioned by THOUHIDULISLAM, 24-May-2016

This product is already available. Answered by FAHIM_REAZA, 30-May-2016 17:51 PM

Q: when this product will be available Questioned by ANMMYNULHOSSAIN, 25-Oct-2016

Q: when this product will be available? Questioned by Nouman, 12-Nov-2016

Q: can i use this in line follower robot??? Questioned by Shemul, 22-Nov-2017

It will not be good. Better use any of the following. >> >> >> >> >> >> Answered by A.R, 22-Nov-2017 16:44 PM

Q: delivery charge koto? Questioned by, 25-Feb-2022

প্রিয় গ্রাহক, আমাদের দুই ধরনের Shipping Method রয়েছেঃ ১। কুরিয়ার সার্ভিস ডেলিভারিঃ ২-৫ কর্মদিবসের মধ্যে পাবেন, খরচ .৬০ টাকা (এই সার্ভিসটি ঢাকা সহ সারা দেশ)। ২। এক্সপ্রেস ডেলিভারিঃ ২৪ ঘণ্টার মধ্যে পাবেন, খরচ ১২০ টাকা (এই সার্ভিসটি শুধুমাত্র ঢাকা মেট্রোতে)। Answered by almamun3248, 26-Feb-2022 11:36 AM

Q: এই PCB টা 17mmX160 করে দিতে পারবেন Questioned by, 29-Mar-2024

স্যার আমাদের প্রোডাক্ট গুলো চায়না থেকে ফিনিশড প্রোডাক্ট নিয়ে আসি এর পরে আমাদের এখানে শুধুমাত্র কোয়ালিটি চেক ব্যাতিত প্রোডাক্টে কাস্টমাইজ করার কোন সুযোগ নেই। তবে আপনি চাইলে অর্ডার করে নিয়ে করতে পারেন। তবে পরবর্তীতে কোন সমস্যা হলে সাইজ কাস্টমাইজ করার কারনে । সেটা আমাদের ওয়ারেন্টি/রিপ্লেস্মেন্ট এর মধ্যে গন্য হবে না। Answered by Atiqur_ORELCO, 02-Apr-2024 09:09 AM

17mmX160mm সাইজ নিতে কত পিছ নিতে হবে এবং দাম কত হবে Answered by, 23-Apr-2024 13:43 PM

Reviews & Ratings


19 Ratings / 0 Reviews







Help: 09678110110

09.00am - 08.00pm (7 days a week)


Pay cash on delivery

Pay cash at your doorstep



All over Bangladesh


Warranty and Replacement

Up to 1 Year