Hantek 2D72 Digital Oscilloscope 70MHz 2Channels

Model No: TOL-00306

TK. 20498.75

Availability: In stock

Quantity:

14 Ratings / 0 Reviews

Category: Measurement

Supplier: Made in China

summary
Specification

Enjoy 4% Discount on total bill on order worth BDT 10000 or more. Enjoy 2% Discount on total bill on order worth BDT 5000 or more.

Features:

2 Channel Oscilloscope + Digital multimeter + arbitrary waveform generator
Oscilloscope: 70MHz Bandwidth with 2 Channels
Digital Multimeter: AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function
Arbitrary Waveform Generator: 0~10MHz Output, Sine, Square, Ramp, Pulse, Noise, etc
320*240 TFT Display, 5200mAh Lithium Battery,Over 24 Hours Cruising Ability
Auto-scale function
Ships with 2 oscilloscope probes and 2 BNC to 2 alligator clip test lead sets

The HANTEK2D72 is an all-new 70 MHz handheld oscilloscope from Hantek featuring a compact and lightweight design with a new generation of 3-in-1 multifunction tester that offers an oscilloscope, signal source and multimeter. It has a small form factor that is easy to hold in one hand and it has a stand that was designed to support multi-angle viewing adjustment. Ultra-low-power design with a Type C charging interface affords a full day or standbytwo months 2 hours battery charge allow working one full day of us or a standby time of two months. It also has a High-definition color LCD screen with a nice clear display with a simple easy to operate Minimalist keyboard design.

Specifications
Aquisition	Channel	OSC+ DMM + AFG
	Bandwidth	70MHz
	Sample Rate	250MSa/s
	Mode	Normal, Peak Detect,
	Average	N acquisitions, all channels simultaneously, N is selectable from 1-128
Input	Input Coupling	DC, AC, GND
	Input Impedance	Resistance: 1MΩ; Capacitance: 25pF
	Probe Attenuation Factors	1X, 10X, 100X, 1000X
	Maximum Input Voltage	200Vpk (DC + peak)
Horizontal	Scanning Speed Range(Sec/Div)	5ns/div ~ 500S/div (1-2-5 sequences)
	Delay Time Accuracy	±50ppm (any interval ≥1ms)
	Wave form Interpolation	Step, Linear, Sin(x)/x
	Memory Depth(Sample Points)	6k
Vertical	A/D converter	8 bit resolution
	Vertical Scale(Volt/div) Range	10mV ~ 10V/div @ x1 probe
		100mV ~ 100V/div @ x10 probe
		1V ~ 1000V/div @ x100 probe
		10V ~ 10KV/div @ x1000 probe
	Position Range	±4division
	Selectable Analog Bandwidth Limit(typical)	20MHz
	Lower Frequency Response(-3dB)	≤ 10Hz (at input BNC)
	Rise Time at BNC(typical)	≤7ns
	DC Gain Accuracy	±3%
Trigger	Trigger Source	CH1, CH2
	Trigger Mode	Auto, Normal and Single
	Trigger Type	Edge trigger, Alternate trigger
	Trigger Sensitivity	0.02 div increments
	Trigger Level Range	±4V
Input	Input Coupling	DC, AC or GND
	Input Impedance, DC coupled	1MΩ ±2% for 20pF ± 3 pF
	Probe Attenuation	1X, 10X
	Max. Input Voltage	CAT I and CAT II: Installation type: 300VRMS(10×)
Signal Source Mode	Waveform Impedance	DC~10MHz
	DAC Clock	2K~100MHz adjustable
	Frequency Resolution	0.1%
	Channel Count	1CH Waveform Output
	Waveform Depth	4KSa
	Waveform Range	±3.5V Max.
Meter Mode	Maximum Resolution	4,000 Counts
	DMM Testing Modes	Voltage, Current, Resistance, Capacitance, Diode & Continuity
	Maximum Input Voltage	AC: 400V, DC: 400V
	Maximum Input Current	AC: 10A, DC: 10A
	Input Impedance	40 MΩ
	Measurement	Range	Accuracy	Resolution
	DC Voltage	400.00mV	± (0.8% + 5)	100uV
		4.000V		1mV
		40.00V		10mV
		400.0V		100mV
		600.0V	± (1% + 2)	1V
		Overload protection: 400mV: 250V, other: 600Vrms.
	AC Voltage	4.000V	± (1.2% + 5)	1mV
		40.00V		10mV
		400.0V		100mV
		600.0V	± (1% + 2)	1V
		Frequency: 40Hz~400Hz;
		Frequency of 400V and 600V: 40Hz~100Hz
	DC Current	40.00mA	± (1% + 2)	10uA
		200.0mA	± (1.5% + 2)	100uA
		4.000A	± (1.8% + 2)	1mA
		10.00A	± (3% + 2)	10mA
		Overload protection:
		self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
	AC Current	40.00mA	± (1.3% + 2)	10uA
		400.0mA	± (1.8% + 2)	100uA
		4.000A	± (2% + 3)	1mA
		10.00A	± (3% + 5)	10mA
		Frequency: 40Hz~400Hz
		self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
	Resistance	400.0Ω	±(1% + 3)	0.1Ω
		4.000KΩ	±(1.2% + 5)	1Ω
		60.00KΩ		10Ω
		400.0KΩ		100Ω
		4.000MΩ		1KΩ
		40.00MΩ	± (1.5%±3)	10KΩ
		Overload protection: 220Vrms
	Capacitance	40.00nF	±(3% + 5)	10pF
		400.0nF		100pF
		4.000uF		1nF
		40.00uF		10nF
		100.0uF		100nF
		Overload protection: 220Vrms
	Diode	0V~2.0V
	On-Off	<50Ω
General Features	Display	320*240 TFT LCD
	Interface	USB Device
	Voltage	DC Input: 5V, 5200mAh Lithium Battery
	Size	7.83" x 3.86" 1.61" / 199 X 98 X 41 (mm)
	Weight	10.85 oz / 0.3kg
	Included accessories	2 oscilloscope probes 2 BNC to 2 alagator clip test lead sets 1 DMM test lead set 1 USB Charging/Data Cable 1 USB Charger (110V AC Input) 1 Users Manual/Support Software on CD-ROM

Question & Answer

Reviews & Ratings

4.9

14 Ratings / 0 Reviews

[13]

[1]

[0]

Help: 09678110110

09.00am - 08.00pm (7 days a week)

Pay cash on delivery

Pay cash at your doorstep

Service

All over Bangladesh

Warranty and Replacement

Up to 1 Year