G1-2-inch-Water-Flow-sensor.jpg

G1/2 Inch Water Flow Sensor

Model No: SEN-00043

TK. 422.76

Availability: In stock

Quantity:

Category: Water

Supplier: Made in China

Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal. 
 

  • Model: YF-S201
  • Sensor Type: Hall effect
  • Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
  • Max current draw: 15mA @ 5V
  • Output Type: 5V TTL
  • Working Flow Rate: 1 to 30 Liters/Minute
  • Working Temperature range: -25 to +80℃
  • Working Humidity Range: 35%-80% RH
  • Accuracy: ±10%
  • Maximum water pressure: 2.0 MPa
  • Output duty cycle: 50% +-10%
  • Output rise time: 0.04us
  • Output fall time: 0.18us
  • Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
  • Pulses per Liter: 450
  • Durability: minimum 300,000 cycles
  • Cable length: 15cm
  • 1/2" nominal pipe connections, 0.78" outer diameter, 1/2" of thread
  • Size: 2.5" x 1.4" x 1.4"

Question & Answer

Total 6 questions

Q: I need 20 of this. How long might it take for you to supply it? Questioned by habibur, 28-Nov-2014

Q: i need 1 piece of this pls Bring me one ASAP Questioned by ashikruet, 12-Feb-2015

Can i measure diesel with it?? Answered by ashikruet, 12-Feb-2015 21:21 PM

And what should I understand by 'measuring'? Answered by A.R, 14-Feb-2015 09:49 AM

flow of diesel per second. Answered by ashikruet, 14-Feb-2015 15:44 PM

No. Water only. Answered by A.R, 15-Feb-2015 10:01 AM

Q: Will you provide lcd display and its microcontroller while delivering it? Thank you. Questioned by AKFahim, 24-May-2015

Those should be ordered separately! Answered by A.R, 25-May-2015 10:34 AM

Q: Wrong Info..Pls correct it..it is not G3/4..It is G1/2..And Flow rate range is 1~30lpm not 1~60lpm..Replace this specification with G1/2 specification.. Questioned by isti_pb, 05-Oct-2015

Q: How to interface it with microcontroller? I mean how output change with flow? Questioned by tarifbabu, 03-Apr-2016

You can visit the given weblink bellow. From the following website, you may get a complete tutorial with example program from here. [Link: http://www.seeedstudio.com/wiki/G1/2_Water_Flow_sensor] Answered by FAHIM_REAZA, 05-Apr-2016 15:22 PM

Q: Is this product water proof?? Questioned by red1toukir, 14-Mar-2017

As far as we can understand from its outlook, it does not seem to be waterproof. Please see the documents in the documents section. These are the info we got about this product. Apart from these it's not possible for us to know anything. Answered by A.R, 15-Mar-2017 10:15 AM

Reviews & Ratings

0 Ratings / 0 Reviews

[0]

[0]

[0]

[0]

[0]

icon

Help: 09678110110

09.00am - 08.00pm (7 days a week)

icon

Pay cash on delivery

Pay cash at your doorstep

icon

Service

All over Bangladesh

icon

Warranty and Replacement

Up to 1 Year