Model No: SEN-00051
Availability: In stock
Supplier: SparkFun, USA
Enjoy 4% Discount on total bill on order worth BDT 10000 or more. Enjoy 2% Discount on total bill on order worth BDT 5000 or more.
Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they’re often unreliable or difficult to implement. Well not anymore! This great GT-521F52 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily embed it into your next project. The module itself does all of the heavy lifting behind reading and identifying the fingerprints with an onboard optical sensor and 32-bit ARM Cortex M3 processor.
To get started, just register each fingerprint that you want to store by sending the corresponding command and pressing your finger against the reader three times. The fingerprint scanner can store different fingerprints, and the database of prints can even be downloaded from the unit and distributed to other modules. In addition to the fingerprint “template,” the analyzed version of the print, you can retrieve the image of a fingerprint and even pull raw images from the optical sensor!
This module is the upgraded version of the GT-521F32 and can store up to an astounding 3,000 different fingerprints! It is capable of 360° fingerprint recognition and download/upload templates using serial interface. Additionally, the GT-521Fxx series features a resolution of 450dpi, with a false acceptance rate of <0.001% and a false rejection rate of <0.1% while only needing <1.5 seconds to identify a unique fingerprint!
The module is small and easy to mount using four mounting holes surrounding the sensor. The onboard JST-SH connector has four signals: Vcc, GND, Tx and Rx. A compatible JST-SH pigtail can be found in the Hookup Accessories section below.
Note: Please be aware that even though this fingerprint scanner is equipped with the same connector we use on all of our Qwiic boards, it is NOT Qwiic or I2C compatible. That being said, all of our Qwiic cables, like our 100mm version, will work for this board.
For Connector Please Click here.
To know more about this product,please click this link.
Question & Answer
Total 7 questions
Q: can you give tutorial on this device to interface with atmega32 (not using Arduino) Questioned by ashikruet, 13-Feb-2015
Q: Kobe nagad pabo eita...? Questioned by shanjedul, 22-Oct-2015
Q: when it will be available? Questioned by zhrony.bd, 06-Nov-2015
Q: when it will be available? Questioned by zhrony.bd, 07-Nov-2015
Q: how do u do that i have ordered GT-511C3 you .... u give me GT-511C1R!!!!! Questioned by tanvir_ahmed_12014946, 17-Nov-2015
As far as we know you already had a talk with our men and they told you what to do. Send it back to us with invoice as they told you. Sorry for this inconvenience. Answered by A.R, 18-Nov-2015 09:48 AM
Q: when it will be available again? plz let me know the exact date... Questioned by Electrotanvir, 09-May-2016
This product will be available within next 7 days. You can select "Notify Me W/A" button from the product link. When this product is available, this will automatically send an email and a SMS to your cell phone. Answered by FAHIM_REAZA, 09-May-2016 11:37 AM
Q: ভাই আমি finger print scanner c3 এটা কিনেছি।।কিন্তু এটার সাথে যে কেবল টা কিনতে বলছে ওইটা ও কিনেছি।। কিন্ত কেবল দিয়ে finger print scanner এর সাথে কম্পিউটার এর কানেক্ট করতে পারছি না। কেবল এর না হল jumper 4 wire Assembly 8..এই কেবল দিয়ে কম্পিউটার এর সাথে কানেক্ট করতে পারছি না finger print saccner সাথে।।আমি ভিডিও টা ও দেখেছি Questioned by musa.cse, 14-Dec-2016
আপনাকে মেইলে উত্তর দেওয়া হয়েছে। Answered by A.R, 15-Dec-2016 20:34 PM
Reviews & Ratings
0 Ratings / 0 Reviews
09.00am - 08.00pm (7 days a week)
Pay cash on delivery
Pay cash at your doorstep
All over Bangladesh
Warranty and Replacement
Up to 1 Year