We accept single and double-layer PCBs with unlimited vias, pads, and components. The PCB will be printed on a Glass Fiber FR4 board. Our double-layer PCBs that we make don’t have copper plating inside and thus do not provide electrical connection between the top and bottom layers. The customer is supposed to solder wires in the vias to make them conductive.
09678110110 (Voice Call Only)
01841110110 (WhatsApp Message Only)
Our helpline numbers are available from 9 am to 6 pm, excluding holidays
Feature | Capability | Description |
---|---|---|
Layer Count | 1–2 Layers | The Number of copper layers in the PCB. |
Material | FR-4 | Grade A laminates from suppliers. |
Max Dimensions | 10 × 8 (inch) | Manual review is required. |
Min Dimensions | 1 × 1 (inch) | Panelization is recommended for small-sized boards. |
Dimension Tolerance | ± 1 mm | |
Shape | Rectangular, Circular | Only rectangular/circular shapes are accepted. |
Thickness Tolerance | ± 25% | e.g., For the 1.6mm board thickness, the finished board thickness ranges from 1.2mm(T-1.6×25%) to 1.2mm(T+1.6×25%) |
Soldermask | Green, Red, Blue, Black, White | We use UV Curable Solder Mask |
Drill Bit Sizes |
0.7 mm 0.8 mm 0.9 mm 1 mm 1.2 mm 5/64 Inch ≈ 1.98mm 1/16 Inch ≈ 1.59mm 2mm 3/32 Inch ≈ 2.38mm 7/64 Inch ≈ 2.78mm 1/8 Inch ≈ 3.18mm 9/64 Inch ≈ 3.57mm 5/32 Inch ≈ 3.97mm 3/16 Inch ≈ 4.76mm 1/4 Inch ≈ 6.35mm 5/16 Inch ≈ 7.94mm 13/32 Inch ≈ 10.32mm 1/2 Inch ≈ 12.7mm |
Please note that if a specific drill bit is unavailable, we’ll use the next larger size to continue the job without delay. |
Hole Size Tolerance | ± 0.3 mm | |
Minimum Trace Width | ≥ 0.5 mm | |
Pad to Pad Clearance | ≥ 0.5 mm | |
Pad to Trace Clearance | ≥ 0.5 mm | |
Trace to Board Edge Clearance | ≥ 0.5 mm | |
Min Text Height | 80 mil | Recommended Font: Arial Bold |
Character Width to Height Ratio | 1:6 |
We accept PDF files only. The following files must be provided in a zipped folder to submit the layout file as PDFs. Any file of the bottom layer must be flipped horizontally (mirror).
File(s) | Requirement |
---|---|
Top Silk, Bottom Copper | Needed for single-layer PCB |
Bottom Resist | Required if you choose solder-masking for a single-layer PCB |
Top Silk, Top Copper, Bottom Copper | Needed for double-layer PCB |
Bottom Silk | Optional for double-layer PCB |
Top Resist, Bottom Resist | Needed if you choose solder-masking for double-layer PCB |